Đang chuẩn bị liên kết để tải về tài liệu:
Mechanical and physical properties ofmedium density fiberboard panels laminated with thermally compressed veneer

Đang chuẩn bị nút TẢI XUỐNG, xin hãy chờ

The objective of study was to evaluate some of the physical and mechanical properties of medium density fiberboard (MDF) panels laminated with veneer sheets compressed at different levels of pressure and temperature. Rotary peeled veneer samples of European beech (Fagus orientalis Lipsky) were compressed at temperatures of 150 C, 180 C, and 200 C using 4 MPa and 6 MPa pressure for 8 min. Commercially produced MDF samples also were laminated with such compressed veneer sheets. Both modulus of elasticity (MOE) and modulus of rupture (MOR) of the specimens increased with increasing pressure and press temperature.

TÀI LIỆU LIÊN QUAN

Investigation of physical and mechanical properties of polyaniline/MMT nanocomposites

Mechanical and physical properties ofmedium density fiberboard panels laminated with thermally compressed veneer

Comparison of mechanical and physical properties of SBR-polymer modified mortars using recycled waste materials

Effect of polymer cement modifiers on mechanical and physical properties of polymer-modified mortar using recycled artificial marble waste fine aggregate

Certain physical and mechanical properties of medium density fiberboards manufactured from blends of corn (Zea mays indurata Sturt.) stalks and pine (Pinus nigra) wood

Mechanical transmission and physical properties of mungbean yellow mosaic virus (MYMV)

Physical and chemical properties affected by temperature in copper films chemical mechanical polishing

Selected engineering properties of tiger nut as a function of moisture content and variety

Effect of wood chip size on hemicellulose extraction and technological properties of flakeboard

Effect of age on variation in physical and mechanical properties of acacia mangium planted in Thai Nguyen