Kinh doanh - Marketing
Kinh tế quản lý
Biểu mẫu - Văn bản
Tài chính - Ngân hàng
Công nghệ thông tin
Tiếng anh ngoại ngữ
Kĩ thuật công nghệ
Khoa học tự nhiên
Khoa học xã hội
Văn hóa nghệ thuật
Sức khỏe - Y tế
Văn bản luật
Nông Lâm Ngư
Kỹ năng mềm
Luận văn - Báo cáo
Giải trí - Thư giãn
Tài liệu phổ thông
Văn mẫu
Giới thiệu
Đăng ký
Đăng nhập
Tìm
Danh mục
Kinh doanh - Marketing
Kinh tế quản lý
Biểu mẫu - Văn bản
Tài chính - Ngân hàng
Công nghệ thông tin
Tiếng anh ngoại ngữ
Kĩ thuật công nghệ
Khoa học tự nhiên
Khoa học xã hội
Văn hóa nghệ thuật
Y tế sức khỏe
Văn bản luật
Nông lâm ngư
Kĩ năng mềm
Luận văn - Báo cáo
Giải trí - Thư giãn
Tài liệu phổ thông
Văn mẫu
Thông tin
Điều khoản sử dụng
Quy định bảo mật
Quy chế hoạt động
Chính sách bản quyền
Giới thiệu
Đăng ký
Đăng nhập
0
Trang chủ
Kỹ Thuật - Công Nghệ
Cơ khí - Chế tạo máy
Magnetic Bearings Theory and Applications Part 2
Đang chuẩn bị liên kết để tải về tài liệu:
Magnetic Bearings Theory and Applications Part 2
Lệ Băng
73
12
pdf
Đang chuẩn bị nút TẢI XUỐNG, xin hãy chờ
Tải xuống
Tham khảo tài liệu 'magnetic bearings theory and applications part 2', kỹ thuật - công nghệ, cơ khí - chế tạo máy phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả | Design and implementation of conventional and advanced controllers for magnetic bearing system stabilization 5 On the basis of the reduced order model described by equation 2 a conventional lead compensator was designed by using root locus method Shi Revell 2002 . Although the lead compensator has been designed to stabilize the MBC500 magnetic bearing system its frequency response has a magnitude which remains large in the high frequency region. This will affect the stability robustness of the closed-loop system. Thus an additional high frequency pole at 7000 Hz or 43982 rad s was incorporated to reduce the gain at high frequency. As a result the final controller employed in Shi Revell 2002 was a second order controller lead with low pass filter with cut off frequency of 7000 Hz and the transfer function of the controller is as follows r 4.23 s 1067.3 43982 Clead s _ s 3202 s 43982 3 Figure 4 illustrates the root locus of the magnetic bearing system represented by the reduced order model shown in equation 2 with the designed lead compensator shown in equation 3 . The closed-loop poles are at -4.43x104 -2.73x103 and -167 392j respectively. Figure 5 shows the Bode plot of the closed-loop system with and without the added low pass filter. It can be seen from the Bode plot that the added low pass filter improves the system robustness by reducing system sensitivity to uncertain high frequency dynamics. Fig. 4. Root locus of the magnetic bearing system a reduced 2nd-order model is used here with the designed lead compensator 6 Magnetic Bearings Theory and Applications Fig. 5. Bode plot of the magnetic bearing system a reduced 2nd-order model is used here with the designed lead compensator 5. Controller Design via Interpolation Approach 5.1 Controller Design via Interpolation Approach A single-loop unity-feedback control system shown in Figure 3 is considered in the controller design via the interpolation approach described in Dorato 1999 . It was shown in Dorato 1999 .
TÀI LIỆU LIÊN QUAN
Magnetic Bearings Theory and Applications Part 5
Magnetic Bearings Theory and Applications Part 6
Magnetic Bearings Theory and Applications Part 8
Magnetic Bearings Theory and Applications Part 9
Magnetic Bearings Theory and Applications Part 10
Magnetic Bearings Theory and Applications Part 12
Magnetic Bearings Theory and Applications Part 1
Magnetic Bearings Theory and Applications Part 2
Magnetic Bearings Theory and Applications Part 3
Magnetic Bearings Theory and Applications Part 4
crossorigin="anonymous">
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.