Đang chuẩn bị liên kết để tải về tài liệu:
Mac OS X Server Administration For Version 10.5 Leopard 2nd phần 8

Trước khi cài đặt và thiết lập hệ điều hành Mac OS X Server làm một chút kế hoạch và trở thành quen thuộc với các tùy chọn của bạn tiếp tục thêm máy móc để khu vực. Ví dụ, để thêm một máy in, nhấp vào nút Add, xác định giá trị cho máy in, sau đó kích OK: Â địa chỉ IP: 192.168.100.2 Â Tên: laserprinter_2000 7 | 7 Select the ports to aggregate from the list. 8 Click Create. 9 Click Done. By default the system gives the link aggregate the interface name bond num where num is a number indicating precedence. For example the first link aggregate is named bond0 the second is bond1 and the third is bond2. The interface name bond num assigned by the system is different from the name you give to the link aggregate port configuration. The interface name is for use at the command line but the port configuration name is for use in the Network pane of System Preferences. For example if you enter the command ifconfig -a the output refers to the link aggregate using the interface name and not the port configuration name bond0 flags 8843 UP BROADCAST RUNNING SIMPLEX MULTICAST mtu 1500 inet6 fe80 2e0 edff fe08 3ea6 prefixlen 64 scopeid 0xc inet 10.0.0.12 netmask 0xffffff00 broadcast 10.0.0.255 ether 00 e0 ed 08 3e a6 media autoselect 100baseTX full-duplex status active supported media autoselect bond interfaces en1 en2 en3 en4 You do not delete or remove a link bond from the Network Pane of System Preferences. You remove the bond through the Manage Virtual Interfaces sheet used to create the bond. Monitoring Link Aggregation Status You can monitor the status of a link aggregate in Mac OS X and Mac OS X Server using the Status pane of the Network pane of System Preferences. To monitor the status of a link aggregate 1 Open System Preferences. 2 Click Network. 3 From the list of network interfaces on the left choose the link aggregate port virtual interface. 4 Click Advanced in the lower right side of the window. 5 Select the Bond Status tab. The Status pane displays a list containing a row for each physical link in the link aggregate. For each link you can view the name of the network interface its speed its duplex setting the status indicators for incoming and outgoing traffic and an overall assessment of the status. Chapter 7 Management 169 Note The Sending and Receiving status indicators