Đang chuẩn bị liên kết để tải về tài liệu:
ANSYS CFX-Mesh Tutorials phần 2

Cái gì là sai với mục Ví dụ: bạn đã cố gắng để tạo ra nó trước khi bạn có đầy đủ quy định, hoặc bạn có một trong các tính năng trên nó mà làm cho các chi tiết kỹ thuật của sản phẩm không hợp lệ. Phác thảo sẽ vẫn được hiển thị ngay cả khi không được chọn. | Tutorial 1 Static Mixer The symbols next to the operations and features indicate their status Symbol Meaning ự Everything is OK. X The item is suppressed i.e. not taking any effect it can be unsuppressed later . _Q_ Something is wrong with the item e.g. you tried to generate it before you had fully specified it or you modified one of the features above it which makes the specifications of the item invalid. You can see the error messages by right-clicking on the object and selecting Show Errors and Warnings. y The item needs to be generated or re-generated because changes to the settings have been made since it was last generated . V The sketch will remain visible even when not selected. The Body has been hidden made invisible . The top part of the window contains the various menus and toolbars. DesignModeler has two main modes of operation and you will have to switch between them as you build up your model. In Modeling Mode the Tree View is shown as in the picture above. However DesignModeler uses sketches collections of edges in a plane to build up solid models and to create these sketches you need to be in Sketching Mode. To switch between the two modes the tabs Sketching and Modeling at the bottom of the Tree View are used simply click on the appropriate tab to switch between the two modes. The area which is occupied by the Tree View when you are in Modeling Mode is taken up with the sketching toolboxes Draw Modify Constraints Dimensions and Settings when in Sketching Mode. To switch between them simply click on their names. Recovering from Mistakes You are certain to make mistakes as you build up your geometry so it is important to know how to recover from these. 12 CFX-Mesh Tutorials. . S.4S IP Inc. Section 2 Geometry Creation If you are in Sketching Mode then the Undo button in the Undo Redo Toolbar towards the top of the window can be used to undo sketching operations. The Back button accessed by right-clicking over the Model View can be used to undo the .