Đang chuẩn bị liên kết để tải về tài liệu:
Designation: C 11 – 98 - Gypsum and Related Building Materials and Systems1

This standard is issued under the fixed designation C 11; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (e) indicates an editorial change since the last revision or reapproval. | Designation C 11 - 98 AMERICAN SOCIETY FOR TESTING AND MATERIALS 100 Barr Harbor Dr. West Conshohocken PA 19428 Reprinted from the Annual Book of ASTM Standards. Copyright ASTM Standard Terminology Relating to Gypsum and Related Building Materials and Systems1 This standard is issued under the fixed ches ii r i tion c ll the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon e indicates an editorial change since the last revision or reapproval. 1. Scope 1.1 This standard contains terminology relating to gypsum and related building materials and systems. The terms are generically defined. More specificand. expanded definitions may appear in appropriate standards. 2. Referenced Documents 2.1 ASTM Standards C 22 C 22M Standard Specification for Gyppum2 C 28 Specification for Gypsum Plasscrs2 C 35 Specification for Inorganic Aggregator for Use in Gypsum Plaster2 C 36 Specification for Gypsum Wahboard2 C 37 Specification for Gypsum Ltali2 C 52 Specification for Gypsum Partition Tiie or Block3 C 59 Specification ft jr Gypssun Càn iildg amd M ll ildg Plas-ter2 C 61 Specification for Gypsum Keene s Cement2 C 79 Specification for Gypsum Sheading B ín ii2 C 317 Specification for Gypssun Concrclc2 C 318 Specification for Gypssun F l -m ín ie3 C 472 Test Methods for Physical Testing of Gypsum Gypsum llasters and Gypsum Concrete2 C 473 Test Methods for Physical Testing of Gypsum Board Products and Gypsum Lath2 C 475 Specification for Joim Compound amd Joim Tape Tor Finishing Gypsum Board2 C 557 Specification For At lK íi v for Fartoning Gypsum Wallboard to Wood Framing2 C 587 Specification for Gypssun Vernier Ptasser2 C 588 Specification for Gypssun Base far Vernier PlasTcrs2 E 84 Test Method for Surface Burning Characteristics of Building Materials4 E 96 Test Methods for Water Vapor Transmission of .