Kinh doanh - Marketing
Kinh tế quản lý
Biểu mẫu - Văn bản
Tài chính - Ngân hàng
Công nghệ thông tin
Tiếng anh ngoại ngữ
Kĩ thuật công nghệ
Khoa học tự nhiên
Khoa học xã hội
Văn hóa nghệ thuật
Sức khỏe - Y tế
Văn bản luật
Nông Lâm Ngư
Kỹ năng mềm
Luận văn - Báo cáo
Giải trí - Thư giãn
Tài liệu phổ thông
Văn mẫu
Giới thiệu
Đăng ký
Đăng nhập
Tìm
Danh mục
Kinh doanh - Marketing
Kinh tế quản lý
Biểu mẫu - Văn bản
Tài chính - Ngân hàng
Công nghệ thông tin
Tiếng anh ngoại ngữ
Kĩ thuật công nghệ
Khoa học tự nhiên
Khoa học xã hội
Văn hóa nghệ thuật
Y tế sức khỏe
Văn bản luật
Nông lâm ngư
Kĩ năng mềm
Luận văn - Báo cáo
Giải trí - Thư giãn
Tài liệu phổ thông
Văn mẫu
Thông tin
Điều khoản sử dụng
Quy định bảo mật
Quy chế hoạt động
Chính sách bản quyền
Giới thiệu
Đăng ký
Đăng nhập
0
Trang chủ
Kỹ Thuật - Công Nghệ
Tự động hoá
Automating Manufacturing Systems with PLCs P2
Đang chuẩn bị liên kết để tải về tài liệu:
Automating Manufacturing Systems with PLCs P2
Bích Loan
76
20
pdf
Đang chuẩn bị nút TẢI XUỐNG, xin hãy chờ
Tải xuống
In ladder logic there are multiple types of outputs, but these are not consistently available on all PLCs. Some of the outputs will be externally connected to devices outside the PLC, but it is also possible to use internal memory locations in the PLC. Six types of outputs are shown in Figure 2.12. The first is a normal output, when energized the output will turn on, and energize an output. The circle with a diagonal line through is a normally on output. When energized the output will turn off. This type of output is not available on all PLC types | plc wiring - 2.12 2.1.5 Ladder Logic Outputs In ladder logic there are multiple types of outputs but these are not consistently available on all PLCs. Some of the outputs will be externally connected to devices outside the PLC but it is also possible to use internal memory locations in the PLC. Six types of outputs are shown in Figure 2.12. The first is a normal output when energized the output will turn on and energize an output. The circle with a diagonal line through is a normally on output. When energized the output will turn off. This type of output is not available on all PLC types. When initially energized the OSR One Shot Relay instruction will turn on for one scan but then be off for all scans after until it is turned off. The L latch and U unlatch instructions can be used to lock outputs on. When an L output is energized the output will turn on indefinitely even when the output coil is deenergized. The output can only be turned off using a U output. The last instruction is the IOT Immediate OutpuT that will allow outputs to be updated without having to wait for the ladder logic scan to be completed. When power is applied on the output x is activated for the left output but turned off for the output on the right. x An input transition on will cause the output x to go on for one scan this is also known as a one shot relay @x __ plc wiring - 2.13 When the L coil is energized x will be toggled on it will stay on until the U coil is energized. This is like a flip-flop and stays set even when the PLC is turned off. x x L x L x x U U Some PLCs will allow immediate outputs that do not wait for the program scan to end before setting an output. Note This instruction will only update the outputs using the output table other instruction must change the individual outputs. IOT IOT x Note Outputs are also commonly shown using parentheses - - instead of the circle. This is because many of the programming systems are text based and circles cannot be drawn. Figure 2.12 .
TÀI LIỆU LIÊN QUAN
PLCs with automating manufacturing systems 2
Ebook Automating Manufacturing Systems (Version 5.0, May 4, 2007)
vision guided intelligent robots for automating manufacturing materials handling and services
vision guided intelligent robots for automating manufacturing materials handling and services
Automating Manufacturing Systems
Automating Manufacturing Systems with PLCs P1
Automating Manufacturing Systems with PLCs P2
Automating Manufacturing Systems with PLCs (P1)
Automating Manufacturing Systems with PLCs (P2)
crossorigin="anonymous">
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.