Kinh doanh - Marketing
Kinh tế quản lý
Biểu mẫu - Văn bản
Tài chính - Ngân hàng
Công nghệ thông tin
Tiếng anh ngoại ngữ
Kĩ thuật công nghệ
Khoa học tự nhiên
Khoa học xã hội
Văn hóa nghệ thuật
Sức khỏe - Y tế
Văn bản luật
Nông Lâm Ngư
Kỹ năng mềm
Luận văn - Báo cáo
Giải trí - Thư giãn
Tài liệu phổ thông
Văn mẫu
Giới thiệu
Đăng ký
Đăng nhập
Tìm
Danh mục
Kinh doanh - Marketing
Kinh tế quản lý
Biểu mẫu - Văn bản
Tài chính - Ngân hàng
Công nghệ thông tin
Tiếng anh ngoại ngữ
Kĩ thuật công nghệ
Khoa học tự nhiên
Khoa học xã hội
Văn hóa nghệ thuật
Y tế sức khỏe
Văn bản luật
Nông lâm ngư
Kĩ năng mềm
Luận văn - Báo cáo
Giải trí - Thư giãn
Tài liệu phổ thông
Văn mẫu
Thông tin
Điều khoản sử dụng
Quy định bảo mật
Quy chế hoạt động
Chính sách bản quyền
Giới thiệu
Đăng ký
Đăng nhập
0
Trang chủ
Khoa Học Tự Nhiên
Hoá học
Study on the removal of ammonium in wastewater using adsorbent prepared from rice hull and magnesium chloride
Đang chuẩn bị liên kết để tải về tài liệu:
Study on the removal of ammonium in wastewater using adsorbent prepared from rice hull and magnesium chloride
Ðình Luận
86
11
pdf
Đang chuẩn bị nút TẢI XUỐNG, xin hãy chờ
Tải xuống
This study aimed to evaluate the ability of magnesium chloride modified carbonized rice hull (MCRH) material for ammonium removal from synthetic and domestic wastewater. The MCRH material was prepared by using waste rice hull from a household rice-processing factory and magnesium chloride salt via a simple mixing and annealing method. The material was then characterized by scanning electron microscopy and energy-dispersive X-ray spectroscopy. The effects of rice hull modification by magnesium chloride and experimental conditions such as initial ammonium concentration (20 - 100 mg/L), amount of adsorbent (0.8 - 2.0 g/L), and adsorption time (0 - 32 h) on the ammonium removal efficiency and adsorption capacity were investigated. Adsorption kinetic and isotherms were also studied for MCRH material. Results showed that magnesium was successfully added on carbonized rice hull with Mg/C molar ratio of 0.22. Ammonium adsorption isotherm fitted well to Langmuir model with maximum adsorption capacity of 65.36 mg/g. | Study on the removal of ammonium in wastewater using adsorbent prepared from rice hull and magnesium chloride
TÀI LIỆU LIÊN QUAN
Thermal-hydraulic study of air-cooled passive decay heat removal system for APRþ under extended station blackout
Efficiency of water hyacinth biomass on removal and recovery of chromium from aqueous solution through column study
Study on synthesis of MnFe2O4/GNPs composite and application on heavy metal removal
Study of copper removal in water by ion exchange material
Laser Hair Removal Guide
A comparative study on modelling material removal rate by ANFIS and polynomial methods in electrical discharge machining process
Material removal rate and electrode wear study on the EDM of silicon carbide
The study on preparing absorbent of potassium nickel hexacyanoferrate (II) loaded zeolite for removal of cesium from radioactive waste solutions and stable solidification method for those spent absorbents
A study of the removal characteristics of heavy metals from wastewater by low-cost adsorbents
Low flow extracorporeal CO2 removal in ARDS patients: A prospective short-term crossover pilot study
crossorigin="anonymous">
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.