Kinh doanh - Marketing
Kinh tế quản lý
Biểu mẫu - Văn bản
Tài chính - Ngân hàng
Công nghệ thông tin
Tiếng anh ngoại ngữ
Kĩ thuật công nghệ
Khoa học tự nhiên
Khoa học xã hội
Văn hóa nghệ thuật
Sức khỏe - Y tế
Văn bản luật
Nông Lâm Ngư
Kỹ năng mềm
Luận văn - Báo cáo
Giải trí - Thư giãn
Tài liệu phổ thông
Văn mẫu
Giới thiệu
Đăng ký
Đăng nhập
Tìm
Danh mục
Kinh doanh - Marketing
Kinh tế quản lý
Biểu mẫu - Văn bản
Tài chính - Ngân hàng
Công nghệ thông tin
Tiếng anh ngoại ngữ
Kĩ thuật công nghệ
Khoa học tự nhiên
Khoa học xã hội
Văn hóa nghệ thuật
Y tế sức khỏe
Văn bản luật
Nông lâm ngư
Kĩ năng mềm
Luận văn - Báo cáo
Giải trí - Thư giãn
Tài liệu phổ thông
Văn mẫu
Thông tin
Điều khoản sử dụng
Quy định bảo mật
Quy chế hoạt động
Chính sách bản quyền
Giới thiệu
Đăng ký
Đăng nhập
0
Trang chủ
Khoa Học Tự Nhiên
Môi trường
Adsorption process on fixed bed column in rich organic wastewater treatmentexperimental studies and numerical simulation
Đang chuẩn bị liên kết để tải về tài liệu:
Adsorption process on fixed bed column in rich organic wastewater treatmentexperimental studies and numerical simulation
Xuân Thảo
86
7
pdf
Đang chuẩn bị nút TẢI XUỐNG, xin hãy chờ
Tải xuống
Wastewater of Minhkhai Textile Company is the sample used in experiment study. According to isotherm function, textile wastewater is poorly adsorbed into SWW210&220. Kinetic data also show that diffusion step of textile wastewater is very slow (DS "' 1.31 *10- 13 m2 /s). With textile wastewater, NADPF model can be used to simulate adsorption process. | Vietnam Journal of Mechanics, VAST, Vol. 28, No. 1 (2006), pp. 28 - 34 ADSORPTION PROCESS ON FIXED BED COLUMN IN RICH ORGANIC WASTEWATER TREATMENTEXPERIMENTAL STUDIES AND NUMERICAL SIMULATION NGUYEN HONG KHA NH, NGUYEN VIET HOANG Institute of Environmental Technology Vietnamese Academy of Science and Technology Abstract. None axially dispersed plug flow model (NADPF) was applied to simulate adsorption process on fixed bed column. To determine model input parameters and verify the model, isotherm curve, solid diffusion coefficient (Ds) and breakthrough curve have been determined from experiment. Activated carbon SWW 210&220 was selected as the main adsorbent for research. Wastewater of Minhkhai Textile Company is the sample used in experiment study. According to isotherm function, textile wastewater is poorly adsorbed into SWW210&220. Kinetic data also show that diffusion step of textile wastewater is very slow (DS "' 1.31 *10- 13 m 2 /s). With textile wastewater, NADPF model can be used to simulate adsorption process. Keywords: adsorption, simulation, activated carbon, textile wastewater. 1. INTRODUCTION Adsorption is one of the most important methods used to treat the liquid pollutants, especially the non-biodegradable substances (ex. textile wastewater) [5]. Although, the effect of this method is quite high and it may be applied in many cases in that the conventional methods are difficult to be used [6], its application is still limited. An important reason is high price of the adsorbents. Many researchers have focused on the study for finding adsorbents of low price, but these studies are still in laboratory scale. An another approach is to optimize the design and operation of adsorption process. In the framework of fundamental research program in the field of Mechanics, in the Institute of Environmental Technology, Vietnamese Academy of Science and Technology, series of experiment studies and numerical simulation work on a rich organic wastewater by .
TÀI LIỆU LIÊN QUAN
crossorigin="anonymous">
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.