tailieunhanh - Material Science_ Vol 2 of 2 - US DOE (1993) WW part 2

Tham khảo tài liệu 'material science_ vol 2 of 2 - us doe (1993) ww part 2', kỹ thuật - công nghệ, cơ khí - chế tạo máy phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả | DOE-HDBK-1017 2-93 MATERIAL SCIENCE OVERVIEW Cont. Volume 2 of 2 Module 3 - Thermal Shock Contains material relating to thermal stress and thermal shock effects on a system. Explains how thermal stress and shock combined with pressure can cause major damage to components. Module 4 - Brittle Fracture Contains material on ductile and brittle fracture. These two fractures are the most common in nuclear facilities. Explains how ductile and brittle fracture are effected by the minimum pressurization and temperature curves. Explains the reason why heatup and cooldown rate limits are used when heating up or cooling down the reactor system. Module 5 - Plant Materials Contains information on the commonly used materials and the characteristics desired when selecting material for use. The information contained in this handbook is by no means all encompassing. An attempt to present the entire subject of material science would be impractical. However the Material Science handbook does present enough information to provide the reader with a fundamental knowledge level sufficient to understand the advanced theoretical concepts presented in other subject areas and to better understand basic system operation and equipment operations. Rev. 0 .