tailieunhanh - Phoenix R/C Professional Model Flight Simulation User Manual Version 3.0 phần 5

Bên phải hộp thả xuống cho phép bạn chọn vị trí bắt đầu của mô hình - cho dù đó sẽ đến từ bên trái hoặc bên phải của vị trí mục tiêu trung tâm. Sử dụng thiết lập này bạn cũng có thể thiết lập các Trainer Autorotation để thực hành autorotations đảo ngược - một thủ thuật khó khăn | The right-hand drop-down box lets you select the starting position of the model - whether it will be coming in from the left or right of the central target position. Using this setting you can also setup the Autorotation Trainer to practice inverted autorotations - a difficult and advanced manoeuvre. Once you have finished with the Autorotation Trainer either click the small round X button to the top-right of the control panel or select the Training None menu option to close and return to the main view and standard free flight mode. Torque Prop-hang training The Torque Trainer is a special simulation mode which is designed to teach you the basics of prop-hanging torque-rolling your 3-d capable airplane model as quickly as possible. In this mode your model is placed on the flying field at an appropriate height orientation and position and will not break on impact. You can then take control of as many or few controls as you wish - with the simulator controlling the others - until you are confident at prop-hanging torque-rolling the model with all controls enabled. You can therefore gradually build up from one simple control to all controls at your own pace decreasing the learning curve dramatically. If you lose control of the model and it moves a certain distance away from your position or rotates too far over the Torque Trainer will automatically restart without you needing to go through the usual take-off routine - thereby speeding up the time taken to master this technique. Please note that the Torque Trainer is only available to fixed-wing models. If you attempt to start the trainer with another type of model selected or change to another type of model after starting the trainer you will be taken back to the main view and standard free flight mode. When the Torque Trainer is active the Torque Training Toolbar will appear at the bottom of the screen. This contains settings for configuring the Torque Trainer to your preferences Setup The left-hand drop-down box .