tailieunhanh - MITSUBISHI ROBOT RV 2A

This installation was developed and manufactured only for use in basic and further training in the fields of automation and communications. The training company and/or the training staff must ensure that the trainees observe the safety precautions described in the accompanying manuals. Furthermore this manual describes setup and possible uses of the singular stations. It contains all information and data required for commissioning, maintenance and operation. Festo Didactic accepts no liability for injury or harm to trainees, the training company and/or any third parties occurring when the installation is used for any purpose apart from training, except Festo Didactic has caused such injury or harm intentionally or by grossly negligence | FESTO iCIM Manual Robot assembly station Order-NR. Type Manual iCIM Designation iCIM_Robot_Assembly_Vision_A006 Printed Autor Schober Graphics Schober Layout Schober Festo Didactic GmbH . D-73770 Denkendorf 2004 Internet didactic e-mail did@ This manual all text and illustrations contained included is protected by copyright. Any utilisation outside the limits of the copyright law and other than training purposes are not permissible without our definite approval. This applies in particular to reproductions operations translations micro filming and the storing and processing into electronic systems. Parts of this manual may be copied by the authorised user exclusively for teaching purposes. Distribution of this documentation as well as reproduction use and spread of its contents is prohibited insofar not permitted explicitly. Offences are liable to compensation. All rights reserved especially the right to execute registrations concerning patents designs for use and patterns. 2 Festo Didactic GmbH . iCIM 1 Intended use The User Manual must be to hand at all times. Keep it close to the machine. This installation was developed and manufactured only for use in basic and further training in the fields of automation and communications. The training company and or the training staff must ensure that the trainees observe the safety precautions described in the accompanying manuals. Furthermore this manual describes setup and possible uses of the singular stations. It contains all information and data required for commissioning maintenance and operation. Festo Didactic accepts no liability for injury or harm to trainees the training company and or any third parties occurring when the installation is used for any purpose apart from training except Festo Didactic has caused such injury or harm intentionally or by grossly negligence. The manual is divided into four parts Part A In addition to technical data Part A contains an overview