tailieunhanh - how to cheat at securing a wireless network phần 6

không dâymã hóa là thiếu sót và có thể bị bẻ khóa bằng cách sử dụng các công cụ nứt thường có sẵn trên Internet. Không có hành động duy nhất được nêu trong chương này nên được xem như một loại bảo mật tốt nhất của cách tiếp cận đối với an ninh là một lớp 1-1 mà thực hiện nhiều mức độ khác nhau và các loại công cụ bảo vệ. | Designing a Wireless Network Chapter 6 211 Obviously with each type of antenna there is an associated cost that is based on the transport characteristics of the wireless network being used. Generally speaking wireless radios and corresponding antennas that require support for more physical layer interfaces will tend to cost more due to the additional chipset integration within the system. However it might also be that the benefit of increased range may outweigh the added expense of integrating more radios to your design. Figure Diagnostic Screen B Beyond the physical environment itself keep in mind that spectral capacity or available bits per second bps of any given wireless LAN is not unlimited. Couple this thought of the aggregate bandwidth of a wireless transport with the density of the users in a given area and the attribute of spatial density is formed. This particular attribute spatial density undoubtedly will be a key wireless attribute to focus on and will grow in importance proportionate to the increase in activity within the wireless reason for this is very wireless industry is already experiencing congestion in the GHz frequency has resulted in a flight to quality in the less congested 5 GHz unlicensed spectrum. Although this frequency range will be able to support more channel capacity and total aggregate bandwidth designers should be aware that as demand increases so too will congestion and bandwidth contention in that spectrum. Because of the spectral and spatial attributes of a wireless LAN we recommend that no more than 30 users be configured on a supporting radio with a 10BaseT LAN interface. However up to 50 users may be supported comfortably by a single radio with a 100BaseT LAN connection. 212 Chapter 6 Designing a Wireless Network Network Topology Although mobility is one of the key attributes associated with wireless technologies a second and commonly overlooked attribute of wireless .

TỪ KHÓA LIÊN QUAN
TÀI LIỆU MỚI ĐĂNG
8    189    0    17-05-2024
3    129    0    17-05-2024
442    97    0    17-05-2024
crossorigin="anonymous">
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.