tailieunhanh - Micro System SIMATIC S7-200

The Two Hour Primer was created as a quick introduction to the world of S7-200 and has deliberately been kept short. It is not a substitute for the S7-200 manual. Therefore, please observe the instructions given in the S7-200 manual, especially the safety guidelines. | SIEMENS Micro System SIMATIC S7-200 Two Hour Primer Edition 01 2000 microsystems Safety Guidelines The Two Hour Primer was created as a quick introduction to the world of S7-200 and has deliberately been kept short. It is not a substitute for the S7-200 manual. Therefore please observe the instructions given in the S7-200 manual especially the safety guidelines. Trademarks SIMATIC and SIMATIC NET are registered trademarks of Siemens AG. Third parties using for their own purposes any other names in this document which refer to trademarks might infringe upon the rights of the trademark owners. Copyright Siemens AG 2000 All rights reserved The reproduction transmission or use of this document or its contents is not permitted without express written authority. Offenders will be liable for damages. All rights including rights created by patent grant or registration of a utility model or design are reserved. Siemens AG Automation and Drives Industrial Automation Systems . Box 4848 D-90327 Nuremberg Federal Republic of Germany Disclaimer of Liability We have checked the content of this manual for agreement with the hardware and software described. Since deviations cannot be precluded entirely we cannot guarantee full agreement. However the data in this manual are reviewed regularly and any necessary corrections included in subsequent editions. Suggestions for improvement are welcomed. Siemens AG 2000 Subject to change without prior notice Siemens Aktiengesellschaft Order number 6ZB5310-0FG02-0BA2 Practice examples Practice examples for the 2 Hour Primer can be found in the directory PRIM_200 2H_EX