tailieunhanh - wiley nortel guide to vpn routing for security and voip phần 8

12. Trên máy tính, nhập các thiết lập mạng lưới của card mạng nội bộ cho một địa chỉ IP trên mạng với một subnet mask của và gateway mặc định thiết lập để . Lưu các thiết lập mạng. 13. Sử dụng cáp chéo Ethernet, hoặc các trung tâm và cáp nối Ethernet, | 504 Chapter 11 12. On the PC enter the network setting of the internal network card for an IP address that is on the network with a subnet mask of and a default gateway set to . Save the network settings. 13. Using the Ethernet crossover cable or the hub and Ethernet patch cables connect the PC to the Private LAN of the Nortel VPN Router. 14. Ping the Management IP Address of . If ping replies are received continue with the lab. If not verify the settings of the previous steps and continue with the lab. 15. On the PC launch a browser window and HTTP to . 16. At the Management screen select PROFILES USERS to configure a user with management rights on the Nortel VPN Router with a statically assigned IP address of . If you are unfamiliar with how to accomplish this the following lab covers configuring a user tunnel for managing the Nortel VPN Router. 17. After the user has been created log off the Nortel VPN Router and disconnect your PC from the Nortel VPN Router. 18. Using the same cabling arrangement that was used to connect to the Private LAN connect to the Public LAN of the Nortel VPN Router. 19. On the PC set the network settings on the internal network card to have an IP address of with a subnet mask of and a default gateway of . Save the network settings. 20. From the PC ping the Public LAN interface at . If ping replies are received continue with the lab. If no ping replies are received verify the settings on the PC and if they appear correct verify the Nortel VPN Router Public LAN settings with the use of the console cable and the HyperTerminal program. 21. On the PC launch the Nortel VPN Client application. Configure a Connection name add the User Name and Password for the user with administrator rights that was previously configured and enter the Destination address of . 22. On the Nortel VPN Client dialog window click the .