tailieunhanh - PLASTICS ADDITIVESAN INDUSTRIAL GUIDE phần 1

Bản quyền © năm 2002 của William Andrew xuất bản Không có một phần của cuốn sách này có thể được sao chép hoặc sử dụng dưới bất kỳ hình thức nào hoặc bằng bất kỳ phương tiện, điện tử hoặc cơ khí, bao gồm cả photocopy, ghi âm hoặc bằng bất kỳ thông tin lưu trữ và hệ thống thu hồi, mà không có sự cho phép bằng văn bản từ Nhà xuất bản. | PLASTICS ADDITIVES AN INDUSTRIAL GUIDE Third Edition Volume III by Ernest w. Flick np NOYES PUBLICATIONS WILLIAM ANDREW PUBLISHING Norwich New York . Copyright 2002 by William Andrew Publishing No part of this book may be reproduced or utilized in any form or by any means electronic or mechanical including photocopying recording or by any information storage and retrieval system without permission in writing from the Publisher. Library of Congress Catalog Card Number 2001088672 ISBN O-8155-1470-0 Printed in the United States Published in the United States of America by Noyes Publications William Andrew Publishing 13 Eaton Avenue Norwich New York 13815. 1-800-932-7045 10 9 8 7 6 5 4 3 2 1 Library of Congress Cataloging-in-Publication Data Flick Ernest W. Plastics additives an industrial guide by Ernest W. Flick. -3rd ed. p. cm. Includes index. ISBN O-8155-1470-0 1. Plastics--Additives. I. Title. 2002 11 --dc20 00-108117 CIP ISBN 0-8155-1464-6 ISBN 0-8155-1472-7 ISBN 0-8155-1470-0 NOTICE To the best of our knowledge the information in this publication is accurate however the Publisher does not assume any responsibility for the accuracy or completeness of or consequences arising from such information. This industrial guide does not purport to contain detailed user instructions and by its range and scope could not possibly do so. Mention of trade names or commercial products does not constitute endorsement or recommendation for use by the Publisher. In some cases plastics additives could be toxic and therefore due caution should be exercised. Final determination of the suitability of any information or product for use contemplated by any user and the manner of that use is the sole responsibility of the user. We strongly recommend that users seek and adhere to a manufacturer s or supplier s current instructions for handling each material they use. The Author and Publisher have used their best efforts