tailieunhanh - network performance toolkit using open source testing tools phần 4

, mẫu số liệu thống kê hiệu suất mạng tải lên bởi người sử dụng, và, tất nhiên, một khu vực tải về, nơi bạn có thể có được chương vực download cho netperf là trên một máy chủ FTP trên máy chủ được tài trợ bởi Hewlett-Packard. | Iperf 107 iperf -c Client connecting to 12 TCP port 5001 TCP window size KByte default 3 local port 1337 connected with port 5001 ID Interval Transfer Bandwidth 3 sec 111 MBytes Mbits sec By default the client sends 8-KB data packets for 10 seconds to the remote server. The total amount of data transferred along with the calculated network bandwidth is displayed. You can alter some of the test features using command-line parameters. Table lists the parameters that can be used. If you want to extend the test to 60 seconds showing an update every 5 seconds you use the following command iperf -c -t 60 -i 5 Client connecting to TCP port 5001 TCP window size KByte default 3 local 192. 168. port 1340 connected with port 5001 ID Interval Transfer Bandwidth 3 sec MBytes Mbits sec 3 sec MBytes Mbits sec 3 sec MBytes Mbits sec 3 sec MBytes Mbits sec 3 sec MBytes Mbits sec 3 sec MBytes Mbits sec 3 sec MBytes Mbits sec 3 sec MBytes Mbits sec 3 sec MBytes Mbits sec 3 sec MBytes Mbits sec 3 sec MBytes Mbits sec 3 sec MBytes Mbits sec 3 sec 660 MBytes Mbits sec A report is displayed every 5 seconds of the test. A final report is also displayed showing the results for the overall 60-second test. The -P option can be used to run simultaneous tests between the two test hosts. Each test stream will contain the same data pattern and the same data and time limits as defined on the command-line parameters iperf -c -P 2 Client connecting to TCP port 5001 TCP window size KByte default 108 Chapter 6 3 local 192. .168. . port 1346 connected with port 5001 6 local 192. .168. . .