tailieunhanh - Propeller LED display

Sensor used in this project is MOC 7811 from Motorola. This is a slotted coupler/interrupter device. In each revolution as the beam is interrupted, the sensor generates a positive pulse. Microcontroller will execute interrupt routine, When a pulse occurs. Interrupt routine measures the total time taken for one revolution, divides it by 120, and stores the result into another timer, Configured in auto-reload mode. Now, the timer overflows after tiny intervals of time. Each time it overflows, next stored value is called from the lookup table, and displayed

TỪ KHÓA LIÊN QUAN
crossorigin="anonymous">
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.