tailieunhanh - ELECTRONICALLY CONTROLLED HYDRAULIC SYSTEMS

-The speed sensor are mounted on the sub axle carriers and receive information from the toothed targets -The targets are fixed on the drive shafts for the front wheels -The front sensors are radial and are not able to be adjusted -The targets are fixed on the bubs(cannot be removed) for the rear wheels -The rear sensor are radial and are not able to be adjusted | ELECTRONICALLY CONTROLLED HYDRAULIC SYSTEMS Anti-lock braking system 38 LOCATION AND INSTALLATION 94 91 7 NOTE this diagram is for general reference only in no case should it be taken as a reference diagram for take off points and circuit al iocations. When replacing one of the braking circuit components on a vehicle always mark the pipes and hoses in order to replace them in their initial positions. ELECTRONICALLY CONTROLLED HYDRAULIC SYSTEMS Anti-lock braking system 38 LOCATION AND INSTALLATION ont In addition to the braking elements - brake calipers - tandem master cylinder with central check valves - double load linked pressure limiter 5 which are conventional the ABS system comprises - a wheel speed sensor for each wheel 3h - tour fixed targets 4 - at the front on the driveshafts - at the rear on the hub r - an hydraulic assembly 1 comprising - a regulating solenoid valve for each front wheel - a solenoid vaJve and a piston plunger for the rear axle - and an hydraulic pump - a computer 2 part of the hydraulic assembly with a self lest function - a dashboard warning light - a diagnosis socket for connecting the XR 25 ABS 2 E - 4 channels - 4 sensors ELECTRONICALLY CONTROLLED HYDRAULIC SYSTEMS Anti-lock braking system 38 LOCATION AND INSTALLATION coni