tailieunhanh - mcsa mcse windows xp professional study guide 2nd phần 7

Các tùy chọn chỉ được cấu hình cho NWLink là số lượng mạng nội bộ và các loại khung. Thông thường, bạn để lại cả hai thiết lập giá trị mặc định của họ. Số lượng mạng nội bộ thường được sử dụng để xác định các máy chủ tập tin NetWare. Nó cũng được sử dụng khi bạn chạy các tập tin và in cho NetWare hoặc sử dụng định tuyến IPX. | 416 Chapter 10 Managing Network Connections EXERCISE continued Configuring NWLink IPX SPX The only options that are configured for NWLink are the internal network number and the frame type. Normally you leave both settings at their default values. The internal network number is commonly used to identify NetWare file servers. It is also used when you are running File and Print Services for NetWare or using IPX routing. The frame type specifies how the data is packaged for transmission over the network. If the computers that are using NWLink use different frame types they are not able to communicate with each other. The default setting for frame type is Auto Detect which will attempt to automatically choose a compatible frame type for your network. If you need to connect to servers that use various frame types you should configure Manual Frame Type Detection which will allow you to use a different frame type for each network. In Exercise you will configure the NWLink IPX SPX protocol. EXERCISE Configuring the NWLink IPX SPX Protocol 1. Select Start and right-click My Network Places then select Properties. Right-click Local Area Connection and select Properties. 2. In the Local Area Connection Properties dialog box highlight NWLink IPX SPX NetBIOS Compatible Transport Protocol and click the Properties button. Copyright 2003 SYBEXInc. 1151 Marina Village Parkway Alameda CA 94501. COPYING PROHIBITED Exam Essentials 417 EXERCISE continued 3. The NWLink IPX SPX NetBIOS Compatible Transport Protocol Properties dialog box appears. In this dialog box you can configure your internal network number and frame type. Summary This chapter described how to manage network connections. We covered the following topics Installing configuring and troubleshooting network adapters. You configure a network adapter through its Properties dialog box. Installing configuring and testing network protocols. TCP IP is the default protocol installed with Windows .