tailieunhanh - Designation: C 348 – 97 - Flexural Strength of Hydraulic-Cement Mortars1

This standard is issued under the fixed designation C 348; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (e) indicates an editorial change since the last revision or reapproval. | Designation C 348 97 Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars1 This standard is issued under the fixed d ii r atic n c 348 the number immediately fc llc Wr ig the designation indicates the year of original adoption or in the case of revision the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon e indicates an editorial change since the last revision or reapproval. 1. Scope This test method covers the determination of the fl exlira 1 strength of hydraulic-cement mortars. The values stated in SI units are to be regarded as the standard. The values shown in parentheses are for information only. Values in SI units shall be obtained by measurement in SI units or by appropriate conversion using the Rules for Conversion and rounding given in Standard IEEE ASTM SI 10 of measurements made in other units. This standard does not purport to address all of the safety concerns if any associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 2. Referenced Documents ASTM Standards C 109 C 109M Test Method for Compressive Strength of Hydraulic Cement Mortars Using 2-in. or 50-mm Cube Specimens 2 C 230 Specifcafion for Flow Tabic Tor Use in Tcsss of Hydraulic Cement2 C 305 Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency2 C 349 Test Method for Compressive Strength of Hydraulic Cement Mortars Using Portions of Prisms Broken in llexure 2 C 670 Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials3 C 778 Specification for Standard S md2 IEEE ASTM SI 10 Standard for Use of the International System of Units SI The Modern Metric System4 3. Summary of Test Method The test mortar used consists of 1 part cement and parts of sand proportion by mass.

TỪ KHÓA LIÊN QUAN
crossorigin="anonymous">
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.