tailieunhanh - Configuring Fast EtherChannel

You have saturated your uplink from your distribution layer switch to your access layer switch due to bandwidth intensive applications. The users served by ALSwitch are in need of more bandwidth. Rather than purchasing new switches that have gigabit Ethernet capability, you have discovered Fast EtherChannel (Cisco’s method of scaling bandwidth for 100 megabit Ethernet links). | Lab Configuring Fast EtherChannel Port 2 3 Port 2 4 DLSwitch1 FEC Trunk Port 1 Port 2 ALSwitch 2900XL 24 4006 24 Objective Achieve more bandwidth between Ethernet switches by combining two 100 megabit links together to form a full duplex 200 megabit link. Scenario You have saturated your uplink from your distribution layer switch to your access layer switch due to bandwidth intensive applications. The users served by ALSwitch are in need of more bandwidth. Rather than purchasing new switches that have gigabit Ethernet capability you have discovered Fast EtherChannel Cisco s method of scaling bandwidth for 100 megabit Ethernet links . You will add a second 100 megabit Ethernet link between DLSwitch1 and ALSwitch and then configure them to operate as one logical link. Lab Tasks 1. First configure your 4000 switch to the diagram above. You can skip this step if you already have the Lab 4000 initial setup configured. Console enable Console enable set system name DLSwitchl System name set. DLSwitch1 enable DLSwitch1 enable set password Enter old password Because you do not currently have a password just hit enter Enter new password Retype new password Password changed. DLSwitch1 enable set enablepass Enter old password Because you do not currently have a password just hit enter Enter new password Retype new password Password changed. DLSwitch1 enable set interface sc0 DLSwitch1 enable set interface sc0 1 2. Next configure your 2900 switch to the diagram above. You can skip this step if you already have the Lab 2900 initial setup configured. Switch enable Switch Set the switch name. Switch config terminal Switch config host ALSwitch ALSwitch config ALSwitch config enable password class ALSwitch config line con 0 ALSwitch config-line login ALSwitch config-line password cisco ALSwitch config-line line vty 0 15 ALSwitch config-line login ALSwitch config-line password cisco ALSwitch config interface vlan 1 .