tailieunhanh - Ethernet 2 Lab Exercise 2 Inter-VLAN Routing and Multi-layer Switching

Tham khảo tài liệu 'ethernet 2 lab exercise 2 inter-vlan routing and multi-layer switching', công nghệ thông tin, phần cứng phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả | CertificationZone Page 1 of 5 Date of Issue 05-01-2001 Lab Exercise 2 Inter-VLAN Routing and Multi-layer Switching by Dan Farkas Introduction Equipment Initial Configuration Part 1 Inter-VLAN Routing Goals Task List Solutions - Part 1 Answers Configurations Part 2 Multi-Layer Switching Goals Task List Solutions - Part 2 Answers Configurations Introduction This is the second lab exercise and should be attempted only after completing the first lab exercise. This lab has two parts. In the first part a link is configured as an ISL trunk and then inter-VLAN routing is configured. In the second part Multi-layer Switching is configured and an access list is added. Equipment Two Catalyst 5xxx or 6xxx switches with Fast EtherChannel-capable line cards and Supervisor Engine III FSX or III FLX module Supervisor engine software Release 1 or later NetFlow Feature Card NFFC or NFFC II Three PCs with NIC cards One Cisco 3620 3640 7500 7200 4500 or 4700 series router with Cisco IOS router software Release 2 WA4 4 or later and a Fast Ethernet interface. Initial Configuration All Links are Fast Elhernel Red Links are Trunks Green Links are in VLAN 2 Blue Links are VLAN 3 The Switch Management domains a re VLAN 1 http studyguides. Issue 36 IssueDate 05-01-2001 CP 11 06 01 CertificationZone Page 2 of 5 Computer PC-1 Computer Computer PC-3 PC-2 IE-LANS2-LS2-01 Device IP Addresses Switch A 24 Switch B 24 PC-1 24 PC-2 24 PC-3 24 Router VLAN 1 - 24 VLAN 2 - 24 VLAN 3 - 24 VTP Domain lab VLAN 1 name vlanl VLAN 2 name vlan2 VLAN 3 name vlan3 Warning We assume that Lab Exercise 1 has been completed. If not go back and do it now. Part 1 Inter-VLAN Routing Goals Reconfigure the link between the router and Switch A to be an ISL trunk. Configure inter-VLAN routing on the router. Test with pings. Any device should be able to ping any other device. Task List 1. On the PCs a. .