tailieunhanh - CSVPN Remote Lab Instructor Guide 1.0

The remote lab is accessed via a PIX firewall, RL-PIX-CSVPN, reachable from the Internet. The trainer will initiate an IPsec VPN tunnel terminating on RL-PIXCSVPN. RL-PIX-CSVPN forwards all traffic to a Cisco 2621 router, RL-RMTCSVPN, which routes traffic based on the source IP address to one of two routers, RL-RMT1-CSVPN or RL-RMT2-CSVPN. These routers will perform IP address NATing and route the traffic to the necessary student pod. | CSVPN Remote Lab Instructor Guide Table of Contents REMOTE LAB Remote Lab Local Classroom CLASSROOM Equipment Physical Initial Student PC Classroom Router REMOTE LAB Establishing and Testing Connectivity to the Remote Telneting to the Remote Terminal VPN Concentrator Initial Hardware Client Initial Router Initial PIXInitial CSVPN INDIVIDUAL LAB SETTINGS AND Peer Chapter 5 Configure Cisco VPN 3000 Concentrator for Remote Access Using Pre- Shared Chapter 6 Configure the Cisco VPN 3000 Concentrator for Remote Access Using Digital Chapter 7 Cisco VPN 3000 Concentrator Monitoring Chapter 8 Configuring Cisco VPN 3002 Hardware Client Remote Chapter 9 Configure Cisco VPN 3000 Concentrators for LAN-to-LAN Using Pre- Shared Chapter 10 Configure Cisco VPN 3000 Concentrators for LAN-to-LAN Using Digital Chapter 11 Configure Cisco IOS IPSec for Pre-Shared Chapter 12 Configure Cisco IOS CA Support RSA Signatures .24 Chapter 13 Configure PIXIPSec Pre-shared Chapter 14 Configure PIXFirewall CA Remote Lab Topology The following is the network topology diagram for the CSVPN remote lab. RL-RBB-CSVPN cP WEB F I P . 2 .1PP rP vP .100 CSACS DHCP CSACS DHCP . .2 1PP cP RL-RMT1-CSVPN PODS 1-5 RL-RMI-CSVPN .21 .100 RL-RMT2-CSVPN PODS 6-10 RL-PIX-CSVPN RL-LCL REMOTE LAB CLASSROOM HUB CA 1 3 4 2001 Cisco Systems Inc. Remote Lab Description The remote lab is accessed via a PIX firewall RL-PIX-CSVPN reachable from the Internet. The trainer will initiate an IPsec VPN tunnel terminating on RL-PIX-CSVPN. .