tailieunhanh - THE INTERGRATED CAD/CAM/ERP SOLUTION P3

Place the slot onto the centre of the 90mm arc. Now use the pocket command once again to cut the pocket through the arm. This time use the fillet option to add a 1mm fillet top and bottom. 12 Fillets Activate the shapes context menu then select the fillet icon . Select the four edges between the boss’s and the centre section and click compute fillets. VIETNAM CAD/CAM TECHNOLOGY ., Support email: badaicadcam@ Page 41 THE INTERGRATED CAD/CAM/ERP SOLUTION Save the file with . Open the arm’s draft document to see that it has automatically been updated with the changes. VIETNAM CAD/CAM TECHNOLOGY ., Support email: badaicadcam@ Page 42 THE INTERGRATED CAD/CAM/ERP. | TggSolid THE INTERGRATED CAD CAM ERP SOLUTION Place the slot onto the centre of the 90mm arc. Now use the pocket command once again to cut the pocket through the arm. This time use the fillet option to add a 1mm fillet top and bottom. 12 Fillets Activate the shapes context menu then select the fillet icon Select the four edges between the boss s and the centre section and click compute fillets. Page 41 VIETNAM CAD CAM TECHNOLOGY . Support email badaicadcam@ JggSolid THE INTERGRATED CAD CAM ERP SOLUTION Save the file with Open the arm s draft document to see that it has automatically been updated with the changes. Page 42 VIETNAM CAD CAM TECHNOLOGY . Support email badaicadcam@ TggSolid THE INTERGRATED CAD CAM ERP SOLUTION Yoke Topics covered Rectangular contour. Extrude. Chamfer. Drilling a face. Use your newly acquired skills to model this part yourself it needs to fit into the cut-out on the end of the shaft and the connecting rod fits inside the slot . Page 43 VIETNAM CAD CAM TECHNOLOGY . Support email .