tailieunhanh - 5000M CNC Programming and Operations Manual P1

ANILAM warrants its products to be free from defects in material and workmanship for one (1) year from date of installation. At our option, we will repair or replace any defective product upon prepaid return to our factory. This warranty applies to all products when used in a normal industrial environment. Any unauthorized tampering, misuse or neglect will make this warranty null and void. Under no circumstances will ANILAM, any affiliate, or related company assume any liability for loss of use or for any direct or consequential damages. The foregoing warranties are in lieu of all other warranties expressed or. | RNILRM 5000M CNC Programming and Operations Manual RNILRM CNC Programming and Operations Manual P N 70000508D - Warranty Warranty ANILAM warrants its products to be free from defects in material and workmanship for one 1 year from date of installation. At our option we will repair or replace any defective product upon prepaid return to our factory. This warranty applies to all products when used in a normal industrial environment. Any unauthorized tampering misuse or neglect will make this warranty null and void. Under no circumstances will ANILAM any affiliate or related company assume any liability for loss of use or for any direct or consequential damages. The foregoing warranties are in lieu of all other warranties expressed or implied including but not limited to the implied warranties of merchantability and fitness for a particular purpose. The information in this manual has been thoroughly reviewed and is believed to be accurate. ANILAM reserves the right to make changes to improve reliability function or design without notice. ANILAM assumes no liability arising out of the application or use of the product described herein. All rights reserved. Subject to change without notice. Copyright 2003 ACU-RITE Companies Inc. All rights reserved. Subject to change without notice. 25-July-03 iii RNIIRM CNC Programming and Operations Manual P N 70000508D - Contents Section 1 - Introduction Effectivity Getting Programming Axis X Y Z Defining Polar Absolute Incremental Angle Plane Arc Section 2 - CNC Console and Software Basics The Alphanumeric Editing CNC Keyboard Option .2-5 Soft Keys F1 to F10 .2-6 Manual Software Pop-Up Screen Clearing Operator .