tailieunhanh - COPPER AND FIBER BUILDING ENTRANCE TERMINALS

ADC’s FL1000-K is designed for use in environmentally unfriendly locations. The wall mount box is classified as a NEMA 4x, ideal for manufacturing environments that have airborne particles. The box is constructed from heavy gauge aluminum and painted with a faderesistant finish. Four 1-inch holes are equipped with hole plugs factory-installed, eliminating the need for the craftsperson to cut any entry or exit holes in the box | COPPER AND FIBER BUILDING ENTRANCE TERMINALS 1st Edition Building Entrance Terminals Page 4 Page 9 Fiber Wall Boxes. Protection Devices. 1-952-938-8080 1-800-366-3891 Building Entrance Terminals Fiber Wall Boxes NEMA 4x-Classified Wall Mount Box Building Entrance Terminals ADC s FL1000-K is designed for use in environmentally unfriendly locations. The wall mount box is classified as a NEMA 4x ideal for manufacturing environments that have airborne particles. The box is constructed from heavy gauge aluminum and painted with a faderesistant finish. Four 1-inch holes are equipped with hole plugs factory-installed eliminating the need for the craftsperson to cut any entry or exit holes in the box. It is recommended that the FL1000-K be used with multifiber cable assemblies for both the incoming and exiting fiber. Features Two cable strength member tie-off kits Stainless mounting hardware Tool for removal of front door Dimensions H x W x D 17 x 19 x x x co Compression fitting optional and hole plug factory-installed Ordering information follows on the next page 1-952-938-8080 .

TỪ KHÓA LIÊN QUAN
crossorigin="anonymous">
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.