tailieunhanh - Cisco ASA 5500 Series Hardware Maintenance Guide

The information in this guide applies to the following ASA 5500 series adaptive security appliance models: ASA 5505, ASA 5510, ASA 5520, ASA 5540, and ASA 5550. In this guide, references to “Cisco ASA 5500 series adaptive security appliance” and “adaptive security appliance” apply to all models unless specifically noted otherwise. This chapter describes the steps to follow before installing new hardware or performing hardware upgrades, and includes the following sections: • Overview, page 1-1 • Installation Overview, page 1-1 • Safety Recommendations, page 1-2 • General Site Requirements, page 1-4. | 111 111 CISCO. Cisco ASA 5500 Series Hardware Maintenance Guide Americas Headquarters Cisco Systems Inc. 170 West Tasman Drive San Jose CA 95134-1706 USA http Tel 408 526-4000 800 553-NETS 6387 Fax 408 527-0883 Customer Order Number 78-17989-01 Text Part Number 78-17989-01 THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS INFORMATION AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS. THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY. The following information is for FCC compliance of Class A devices This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates uses and can radiate radio-frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case users will be required to correct the interference at their own expense. The following information is for FCC compliance of Class B devices The equipment described in this manual generates and may radiate radio-frequency energy. If it is not installed in accordance with Cisco s installation instructions it may cause interference with radio and television reception. This equipment has been tested and found to .

• Chứng chỉ quốc tế
• information technology
• international certification
• Safety Recommendations
• Cisco ASA 5580
• Hardware
• Electrostatic Discharge
• automobile
• Electromagnetic
• Vehicle System Electrical TransientsBlimp Problems
• Unshielded Cables
• Filter Placement
• design methodology
• nano cmos era
• cmos device
• subwavelength optical lithography
• theory
• process technology
• Safety Precautions
• Electrostatically Sensi tive
• Devices
• Service Navigation