tailieunhanh - KRONE - White paper - LSA Plus Connectivity (Overview) - 2000
Tham khảo tài liệu 'krone - white paper - lsa plus connectivity (overview) - 2000', công nghệ thông tin, quản trị mạng phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả | LSA-PLUS CONNECTIVITY 1 1. KRONE COMPONENTS IN THE LOCAL LOOP Exchange System side Line side Local Exchange Cross-Connection Cabinet Main Distribution Frame (MDF) Socket Distribution Point (DP) Subscriber KRONE LSA-PLUS connection systems can be used throughout the Local Loop, in Main Distribution Frames, Cross- Connection Cabinets, Distribution Points and In-house areas. 01/02/00 Hollands FMS1 Page 1 LSA-PLUS CONNECTIVITY 1 2. GENERAL INFORMATION LSA-PLUS Series 2 Connection, Disconnection and Switching Modules for 8 or 10 pairs: - for fitting on Back Mount Frames of varying capacity (standard-program) - for fitting on round profile rods as LSA-PROFIL. - for mounting on Printed Circuit Boards by the use of soldering pins Connectable Wiring: Plastic insulated copper wiring with solid or stranded conductors a) Solid Wires Conductor diameter 0, mm 1,2 ) External diameter 0, mm AWG 1 ) After connection with ≥0,65 mm, no longer connectable with conductors ≤0,65 mm 2 ) Other diameters on request b) Stranded Wires 3 ) Conductor diameter 7 x 0, mm External diameter 0, mm AWG 3 ) Stranded wiring on Series 1 and 8 on request LSA-PLUS cable connecting equipment Distribution housings for internal and external use or distribution, that with additional fittings may be used to connect LSA-PLUS Quick Connection System or already equipped with the necessary mounting components. Number of wires per contact slot (same type of wire and same diameter) Series 2 max. 2 4 ) 4 ) 2 wires only with diameters 0,35 to 0,65 mm 01/02/00 Hollands FMS1 Page 2 LSA-PLUS CONNECTIVITY 1 3. CONNECTION TECHNIQUES Splice - Wire wrap - LSA-PLUS System . Conventional mechanical connections Twisted and Sleeved Twisted and Soldered Screw Terminal Wrapped around Post Wire-wrap Crimped (Normally soldered) Conventional connection techniques require the wire to be cut to length and the insulation removed before the wire can be connected. The wires are then
đang nạp các trang xem trước