tailieunhanh - Operation & Maintenance Handbook

This section covers the major safety precautions related to programming. Before attempting to perform programming, read the supplied operator’s manual and programming manual carefully such that you are fully familiar with their contents. Let 's see with us to understand | GE Fanuc Automation Computer Numerical Control Products Series 16i 118i 1160i 1180i - Model PA Parameter Manual GFZ-63130EN 01 September 1997 GFL-001 Warnings Cautions and Notes as Used in this Publication Warning Warning notices are used in this publication to emphasize that hazardous voltages currents temperatures or other conditions that could cause personal injury exist in this equipment or may be associated with its use. In situations where inattention could cause either personal injury or damage to equipment a Warning notice is used. Caution Caution notices are used where equipment might be damaged if care is not taken. Note Notes merely call attention to information that is especially significant to understanding and operating the equipment. This document is based on information available at the time of its publication. While efforts have been made to be accurate the information contained herein does not purport to cover all details or variations in hardware or software nor to provide for every possible contingency in connection with installation operation or maintenance. Features may be described herein which are not present in all hardware and software systems. GE Fanuc Automation assumes no obligation of notice to holders of this document with respect to changes subsequently made. GE Fanuc Automation makes no representation or warranty expressed implied or statutory with respect to and assumes no responsibility for the accuracy completeness sufficiency or usefulness of the information contained herein. No warranties of merchantability or fitness for purpose shall apply. PowerMotion is a trademark of GE Fanuc Automation North America Inc. Copyright 1997 GE Fanuc Automation North America Inc. All Rights Reserved. B-63130EN 01 PREFACE PREFACE This manual describes the specialized parameters for the following model Product name Abbreviation FANUC Series 16 -PA 16 -PA FANUC Series 18 -PA 18 -PA FANUC Series 160 -PA 160 -PA FANUC Series 180 -PA 180 -PA NOTE For