tailieunhanh - Ducvietjsc.com.vn Advanced General-purpose Inverters SYSDRIVE RX Series Digital Operator Used to

Advanced General-purpose Inverters SYSDRIVE RX Series Digital Operator Used to set parameters, perform various monitoring, and start and stop the Inverter. Nomenclature and Functions ■ Inverter Nomenclature and Functions Data Display Displays relevant data, such as frequency reference, output current, and set values. Terminal block Cover Remove this cover when wiring the terminal block. Để biết thêm chi tiết xin liên hệ: ĐẠI LÝ ỦY QUYỀN TẠI VIỆT NAM CÔNG TY CỔ PHẦN THƯƠNG MẠI CÔNG NGHỆ ĐỨC VIỆT Số 17, ngõ 26/17, Nguyên Hồng, Đống Đa, Hà Nội. Tel: (04) 773 6839; 773 6116 – Fax: (04) 773 6122 E-mail: Ducvietjsc@ , Sales@ Website: Advanced General-purpose Inverters SYSDRIVE RX Series ■ Part. | omRon Advanced General-purpose Inverters SYSDRIVE RX Series Nomenclature and Functions Inverter Nomenclature and Functions Để biết thêm chi tiết xin liên hệ ĐẠI LÝ ỦY QUYỀN TẠI VIỆT NAM CÔNG TY CỔ PHẦN THƯƠNG MẠI CÔNG NGHỆ ĐỨC VIỆT Số 17 ngõ 26 17 Nguyên Hồng Đống Đa Hà Nội. Tel 04 773 6839 773 6116 - Fax 04 773 6122 E-mail Ducvietjsc@ Sales@. vn Website Advanced General-purpose Inverters SYSDRIVE RX Series omRon Part Names and Descriptions of the Digital Operator Name Function O POWER POWER LED indicator Lit when the power is supplied to the control circuit. O ALARM ALARM LED indicator Lit when an Inverter error occurs. RUNO RUN during RUN LED indicator Lit when the Inverter is running. PRGO PROGRAM LED indicator Lit when the set value of each function is indicated on the data display. Blinks during warning when the set value is incorrect . o o o o . Data display Displays relevant data such as frequency reference output current and set values. OHz O Vn kW OAU O Data display LED indicator Lit according to the indication on the data display. Hz Frequency V Voltage A Current kW Power Ratio O RUN command LED indicator Lit when the RUN command is set to the Digital Operator. The RUN key on the Digital Operator is available for operation RUN RUN key Activates the Inverter. Available only when operation via the Digital Operator is selected. Check that the RUN command LED indicator is lit. STOP RESET STOP RESET key Decelerates and stops the Inverter. Functions as a reset key if an Inverter error occurs. CZ7LD Mode key Switches between the monitor mode dDDD the basic function mode FEDE and the extended function mode ADDD bDDD cDDD HDDD . j Enter key Enters the set value. To change the set value be sure to press the Enter key. Increment key Changes the mode. Also increases the set value of each function. Decrement key Changes the mode. Also decreases the set value of each function. Advanced .