tailieunhanh - Graft copolymerization of methyl methacrylate and vinyltriethoxysilane onto natural rubber

Preparation and characterization of natural rubber grafted with methyl methacrylate (MMA) and vinytriethoxysilane (VTES) were performed in the present work. Graft copolymerization of methyl methacryate was carried out in latex stage, and VTES was added during the graft copolymerization of MMA. | JST Engineering and Technology for Sustainable Development Volume 31 Issue 4 October 2021 055-060 Graft Copolymerization of Methyl Methacrylate and Vinyltriethoxysilane onto Natural Rubber Phản ứng đồng trùng hợp ghép metyl metacrylat và vinyltriethoxysilane lên cao su thiên nhiên Nghiem Thi Thuong Dao Van Huong School of Chemical Engineering Hanoi University of Science and Technology Hanoi Vietnam Email Abstract Preparation and characterization of natural rubber grafted with methyl methacrylate MMA and vinytriethoxysilane VTES were performed in the present work. Graft copolymerization of methyl methacryate was carried out in latex stage and VTES was added during the graft copolymerization of MMA. FTIR and NMR spectroscopy were used to investigate the structure of graft copolymer and determination of conversion and grafting efficiency of MMA. It confirmed that the poly methyl methacrylate PMMA and silica particles PVTES were successfully formed in NR-graft-PMMA-PVTES graft copolymer. Conversions of MMA were about 90-100 however MMA grafting efficiency decreased as the MMA concentrations increased. Tensile property of NR-graft-PMMA-PVTES was found to improve compared with that of pure NR. Keywords Natural rubber methyl methacrylate vinyltriethoxysilane graft copolymerization tensile property. Tóm tắt Trong nghiên cứu này quá trình tổng hợp và đặc trưng cao su ghép với metyl metacrylat MMA và vinyltriethoxysilane VTES được tiến hành. Quá trình đồng trùng hợp của metyl metacrylate được tiến hành ở trạng thái latex sau đó thêm vinyltriethoxysilanes vào trong quá trình ghép của MMA. Phổ hồng ngoại và phổ cộng hưởng từ hạt nhận được sử dụng để phân tích cấu trúc của cao su ghép và định lượng hiệu suất chuyển hóa và hiệu suất ghép của MMA. Kết quả cho thấy poly methyl methacrylate PMMA và hạt silica PVTES được tạo ra trong cao su ghép NR-graft-PMMA-PVTES. Hiệu suất chuyển hóa của MMA đạt khoảng 90-100 trong khi đó hiệu suất ghép của MMA không

TỪ KHÓA LIÊN QUAN
crossorigin="anonymous">
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.