tailieunhanh - Study and design of micro gripper driven by electrothermal V-shaped actuator

This paper presents a design, calculation, simulation and fabrication of micro gripper driven by the electrothermal V-shaped actuator. The working principle of the V-shaped actuator bases on the thermal expansion of a thin beam when applying a voltage. The advantages of this design are large displacement amplification factor, large driving force, low voltage, simple configuration and control. The maximum displacement of each jaw can be up to 40µm at the calculated voltage of and low operating frequency |

crossorigin="anonymous">
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.