tailieunhanh - The influence of electrical parameters on the penetration of tungsten into the SKD61 workpiece surface in PMEDM using tungsten carbide powder

In the study, the authors studied the effect of the electrical current (Ip); the time-on discharge (Ton) on the penetration of tungsten into the surface of SKD61 steel at different concentrations of tungsten carbide powder used in powder mixed electrical discharge machining. The research has shown that the electrical current and the time-on discharge can impact greatly on the penetration of tungsten and the carbidation of the steel surface. In the mode of low electrical discharge, the penetration of tungsten into the surface and the carbidation of the surface is better than that of the mode of high electrical discharge. |

TỪ KHÓA LIÊN QUAN
crossorigin="anonymous">
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.