tailieunhanh - Automated system for monitoring the quality characteristics of coal, transported on the belt-type conveyor, using a non-contact measuring method

The paper presents a brief description of an automated system, designed to control coal quality in accordance with the specified parameters of the waste rock content owing to obtaining, collecting, processing and storing information from primary instruments, using a radioisotope measuring method. | Automated system for monitoring the quality characteristics of coal transported on the belt-type conveyor using a non-contact measuring method International Journal of Mechanical Engineering and Technology IJMET Volume 10 Issue 04 April 2019 pp. 49-53. Article ID IJMET_10_04_007 Available online at http ijmet JType IJMET amp VType 10 amp IType 4 ISSN Print 0976-6340 and ISSN Online 0976-6359 IAEME Publication Scopus Indexed AUTOMATED SYSTEM FOR MONITORING THE QUALITY CHARACTERISTICS OF COAL TRANSPORTED ON THE BELT-TYPE CONVEYOR USING A NON-CONTACT MEASURING METHOD Ivan V. Pantyushin Design Center LLC PhD in Engineering Saint-Petersburg ABSTRACT The paper presents a brief description of an automated system designed to control coal quality in accordance with the specified parameters of the waste rock content owing to obtaining collecting processing and storing information from primary instruments using a radioisotope measuring method. The system allows the personnel to obtain reliable information on the quality of mined coal in a timely manner. This information is transmitted to the MES at the enterprise to assess the performance and cost of production. Keywords automated system database coal quality belt-type conveyor radioisotope measuring method. Cite this Article Ivan V. Pantyushin Automated System for Monitoring the Quality Characteristics of Coal Transported on the Belt-Type Conveyor Using a Non-Contact Measuring Method International Journal of Mechanical Engineering and Technology 10 4 2019 pp. 49-53. http IJMET JType IJMET amp VType 10 amp IType 4 1. INTRODUCTION One of the main ways to increase the economic efficiency of mining enterprises in combination with cost optimization is improving the quality of marketable products and reducing its losses 1 . Improving the quality of products and reducing the loss of extracted components is a matter of great importance for enterprises performing the development of

• Tự động hoá
• Brief description of an automated system
• Control coal quality
• Waste rock content
• Radioisotope measuring method
• Belt type conveyor