tailieunhanh - Theoretical investigation of multidimensional force moment measurement dynamometer

The measured FEA results are consistent with the applied standard force/moments. The error difference of FEM analysis is under 1%. The FEM simulations results are approximately 99-100% of the exerted axial force, vertical force and pitch moment respectively. The designed MP-M dynamometer model is capable to measure spatial force/moment accurately and simulation experiments are discussed. | Theoretical investigation of multidimensional force moment measurement dynamometer International Journal of Mechanical Engineering and Technology IJMET Volume 11 Issue 2 February 2020 pp. 45-55 Article ID IJMET_11_02_005 Available online at http ijmet JType IJMET amp VType 11 amp IType 2 ISSN Print 0976-6340 and ISSN Online 0976-6359 IAEME Publication THEORETICAL INVESTIGATION OF MULTI- DIMENSIONAL FORCE MOMENT MEASUREMENT DYNAMOMETER Danaish Ren Zongjin Jhang Jun Muhammad Ayaz Akbar Department of Mechanical Engineering Dalian University of Technology China ABSTRACT The precision in the measurement of three-dimensional force moment is very necessary for the manufacturing process for satellite and in military equipment. The purpose of this research is to design a multi-dimensional multi-point force moment F M measurement MP-M dynamometer model based on three-axis piezoelectric sensors installation. The FEM simulation is performed using ANSYS software and mathematical analyses are carried out using derived equations. The measured FEA results are consistent with the applied standard force moments. The error difference of FEM analysis is under 1 . The FEM simulations results are approximately 99-100 of the exerted axial force vertical force and pitch moment respectively. The designed MP-M dynamometer model is capable to measure spatial force moment accurately and simulation experiments are discussed. Keywords Three-axis piezoelectric sensor multi-dimensional measurement SolidWorks design and FEM simulation. Cite this Article Danaish Ren Zongjin Jhang Jun Muhammad Ayaz Akbar Theoretical Investigation of Multi-Dimensional Force Moment Measurement Dynamometer. International Journal of Mechanical Engineering and Technology 11 2 2020 pp. 45-55. http IJMET JType IJMET amp VType 11 amp IType 2 1. INTRODUCTION AND LITERATURE REVIEW This article outlines Theoretical investigation of multi-dimensional force moment measurement .