tailieunhanh - Study on moisture-cured polyurethane as undercoating layer for metallization

In this work a technique of metallizing substrate via electroless plating using moisture-cured polyurethane (MCPU) system as the undercoat is presented. MCPU prepolymer was prepared by mixing polyethylene glycol divinyl ether and diphenylmethane-4, 4’-diisocyanate in 1:1 ratio. The effects of etching time as well as curing period on the surface characteristic of MCPU undercoating were investigated. Contact angle measurements, FTIR and SEM were employed to study the changes on the surface of the treated MCPU undercoats prior to electroless nickel plating. Electroless plating was performed using nickel bath and visual inspection was performed after completing the electroless plating cycles. Relative increase in wettability of the treated MCPU was observed. | Study on moisture-cured polyurethane as undercoating layer for metallization

TÀI LIỆU MỚI ĐĂNG
8    199    0    03-06-2024
41    136    0    03-06-2024
6    102    0    03-06-2024
4    102    0    03-06-2024
6    116    0    03-06-2024
crossorigin="anonymous">
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.