tailieunhanh - Microstructure and mechanical properties of ultrafine-grained IF steel sheets produced by constrained groove pressing

In this paper, the severe plastic deformation method (SPD) known as constrained groove pressing (CGP) was applied to produce ultrafine-grained microstructure in IF steel sheets. In the CGP technique, samples are subjected to repetitive shear deformation under the plane strain deformation condition using the constrained grooved and flat dies. | Nội dung Text Microstructure and mechanical properties of ultrafine-grained IF steel sheets produced by constrained groove pressing Engineering Solid Mechanics 8 2020 63-68 Contents lists available at GrowingScience Engineering Solid Mechanics homepage esm Microstructure and mechanical properties of ultrafine-grained IF steel sheets produced by constrained groove pressing Saeid Shahrakia Hadi Miyanajib and Hossein Abdollahia a Department of Mechanical Engineering University of Zabol Zabol Iran b Department of Industrial Engineering University of Louisville Louisville USA A R T I C L EI N F O ABSTRACT Article history In this paper the severe plastic deformation method SPD known as constrained groove pressing Received 8 July 2019 CGP was applied to produce ultrafine-grained microstructure in IF steel sheets. In the CGP Accepted 22 August 2019 technique samples are subjected to repetitive shear deformation under the plane strain deformation Available online condition using the constrained grooved and flat dies. For assessment of microstructure and 22 August 2019 Keywords mechanical properties of the CGPed IF steel sheet several testing such as uniaxial tensile test SPD hardness measurements scanning electron microscopy SEM and X-ray diffraction analysis have CGP been utilized. Finally it was observed that the grains are significantly refined after the 16-step Mechanical properties pressing of the interstitial free IF steel sheets. The grains were reduced from 45µm to 243 nm Microstructure after four passes. 2020 Growing Science Ltd. All rights reserved. 1. Introduction In polycrystalline materials the grain size plays a major role in establishing many crucial properties including the strength and resistance to plastic flow. In general materials with small grain sizes have several advantages over their coarse-grained counterparts because they enjoy higher strength and other favorable properties including the potential for being used in .

• Cơ khí - Chế tạo máy
• Microstructure and mechanical properties
• Ultrafine grained IF steel sheets
• Constrained groove pressing
• The severe plastic deformation method
• The CGPed IF steel sheet
• Journal of Science and Technology
• Effect of temperature on microstructure
• Mechanical properties of superheater steel pipe
• Thermal power plant
• Superheater steel pipe
• Mechanical properties
• Microstructure of high strength concrete containing
• Polypropylene fibres exposed
• High strength concrete containing
• High performance concrete
• Investigation of microstructure
• Al Alloy AlMg4 5Mn
• The traverse speed
• tool rotational speed
• Friction stir welding process
• Large ring shaped forgings
• Continuous cooling transformation
• Measured microstructure contents
• Mechanical Property prediction
• Cooling heat transfer coefficient
• High performance fiber reinforced mortar
• Engineered cementitious composite
• Drying shrinkage
• Mechanical strength
• Complex mechanical
• Friction stir welding
• Dissimilar Al Cu joint
• Friction stir welding method
• Micro cracks formed
• Solid state joining method
• Ferrite and austenite
• Ferritic martensitic Oxide Dispersion Strengthened
• Sodium Fast Reactor
• Electron Backscatter Diffraction
• Fe 9%Cr ODS steel
• Wire arc additive manufacturing
• Low carbon steel
• Welding current
• Carbohydrate polymers
• Nanocellulose based aerogel
• TEMPO free oxidation
• Microstructure composite mechanism
• Crystal structure
• 316L stainless steel
• Selective laser melting
• Cold rolled solution
• Effect of heat treatment
• Hot isostatic pressing