tailieunhanh - Properties of polymer-modified cement mortar using pre-enveloping method

A new method, pre-enveloping sand with polymer, was adopted to make polymer-modified cement mortar (PCM). In the research, two kinds of latex, ., styrene acrylate rubber and styrene butadiene rubber, were used. The experimental results of physical and mechanical tests showed that, at the same level of polymer cement ratio, pre-enveloping method was better than normal method regarding the performance of the resulted composite. Moreover, in the condition of relatively low addition of polymer, the improvement of physical and mechanical properties, especially the resistance to cycling of freezing –thawing, by the pre-enveloping method was more significant. Additionally, it was found that styrene butadiene rubber can improve the fluidity of the mortar, and mortar with styrene acrylate rubber can maintain the same fluidity as the control sample by adding small quantities of a superplasticizer. Styrene acrylate rubber had no water-reducing ability by itself. D 2002 Elsevier Science Ltd. All rights reserved. | Properties of polymer-modified cement mortar using pre-enveloping method

crossorigin="anonymous">
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.