tailieunhanh - Study of a betavoltaic battery using electroplated nickel 63 on nickel foil as a power source

A betavoltaic battery was prepared using radioactive 63Ni attached to a three-dimensional single trenched PeN absorber. The optimum thickness of a 63Ni layer was determined to be approximately 2 mm, considering the minimum self-shielding effect of beta particles. Electroplating of radioactive 63Ni on a nickel (Ni) foil was carried out at a current density of 20 mA/cm2 . | Study of a betavoltaic battery using electroplated nickel 63 on nickel foil as a power source

TỪ KHÓA LIÊN QUAN
crossorigin="anonymous">
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.