tailieunhanh - A new method for collecting the garbage non – using energy

This paper presents the design and evaluation of a non-using energy mechanism for collecting the garbage. The collector of rubbish is implemented by using the mechanical motion includes the gearbox, conveyor belt and brush, to alleviate the need of fuel as well as energy. | The 2012 International Conference on Green Technology and Sustainable Development (GTSD2012) A NEW METHOD FOR COLLECTING THE GARBAGE NON – USING ENERGY Le Phuong Truong*, Tran Huu Tuyen and Nguyen Ngoc Phuong Lac Hong University, Vietnam ABSTRACT This paper presents the design and evaluation of a non-using energy mechanism for collecting the garbage. The collector of rubbish is implemented by using the mechanical motion includes the gearbox, conveyor belt and brush, to alleviate the need of fuel as well as energy. The basic operation principles of the machine describe as follow: with a 384 N thrust force, the sanitation worker can move the garbage cart which makes the brooms work and take the rubbish to the conveyor belt then put it into the waste tank. The system can collect 100% of amounts of the garbage for leaves, papers, etc. and 60% for the small stones and small leaves. The system would not only help to reduce the cost but also be environmental friendliness. The effectiveness of the approach is verified through the experimental results based on the real system action. KEYWORDS: Green technology, collecting the garbage, non- using energy 1. INTRODUCTION Nowadays, the fossil fuels are gradually exhausted. The study of energy saving technologies and conservation are increasingly developed. Peter McKendry produced energy from biomass [1]. Tomio Mimura et al. presented research and development on energy saving technology for flue gas carbon dioxide recovery and steam system in power plant [2]. These studies have made energy conservation technologies and energy efficiency. Most garbage carts and waste collecting robots use electricity or fossil fuels for operation [3]. These machines achieve higher performance several times compared with collection by human but they still have some disadvantages: they cannot work well in some locations and not environment friendly. From the actual needs, this paper presents a solution of collecting the garbage without using .