tailieunhanh - Design of control system for 3D printer based on dsp and fpga

The platform developed seeks to increase awareness of the potential for the integration of closed-loop control into existing open source designs and will help to improve the performance of the low-cost 3D printer system. | Journal of Automation and Control Engineering Vol. 6, No. 1, June 2018 Design of Control System for 3D Printer Based On DSP and FPGA Dima Younes School of Mechanical and Electronic Engineering, Wuhan University of Technology, Wuhan, China Email: dima_dy@ Tan Yuegang, Cheng Xin, Essa Alghannam, and Amjad Altazah School of Mechanical and Electronic Engineering, Wuhan University of Technology, Wuhan, China School of Information Engineering, Wuhan University of Technology, Wuhan, China Email: {ygtan, chengx, essaalghannam} @ and amjad_wuhanligon@ Abstract—3D printing technology is a rapidly-evolving field, which has seen an explosion of interest in the last decade due to the influence and great degree of maker movement and the rapid prototyping. A set of specialized print control systems is the basis for the fabrication of electronic technology. The use of closed-loop control to improve performance in robots is a well-established technology, by adding the necessary sensors and computational hardware, it is easy to establish a low-cost and efficient 3D printer system. Success of a motion control systems depends not only on the controlling algorithm but also on the control hardware structure. Compared with common robot manipulators, 3D printer system has a more open-ended structure, which needs the control system to be flexible to the flexibility in 3D printer system. Based on DSP and FPGA, unique flexibility and excellent control capability of the motion controller can be designed to fit the requirements of the flexibility in 3D printer system. In this thesis, a kind of closed-loop control structure based on DSP and FPGA for 3D printer has been proposed. The main contents include: (1) the analysis of mechanical parts of common low-cost commercial 3D printer and its requirement for control system. (2) FPGA and DSP can inherently handle processes in parallel, therefore a kind of closed-loop control system has been designed to execute .

• Cơ khí - Chế tạo máy
• Journal of Automation and Control Engineering
• Design of control system for 3D printer
• DSP and FPGA
• Control system for 3D printer
• Closed loop control
• Increasing the productivity of automation tool by developing socket
• Automation tool by developing socket
• Auto report generated
• The automation tool
• Abnormality management in industrial automation systems
• Industrial automation systems
• Future industrial automation systems
• Abnormality management approach
• Sliding mode based relative pose synchronous control
• Space autonomous rendezvous
• Relative pose synchronous control
• The control system design
• The sliding mode control law
• Application of pressure control type quasiservo valve
• Force control system
• The quasi servo valve
• The pneumatic cylinder
• Robust vehicle suspension system
• Converting active & passive control
• A vehicle to semi active control system analytically
• Semi Active Vehicle System
• Environmental control of a greenhouse system
• NI embedded systems technology
• The soil moisture
• The Engineering School of Bahrain Polytechnic
• Improving performances of a cement rotary kiln
• A model predictive control solution
• Cement rotary kiln
• Advanced process control
• Model predictive control
• Active learning in motor control and matlab simulation
• Active learning in motor control
• Servo motors of the simulation of neural networks
• Motion of a robot arm
• Redundancy and operation of power control system
• A deep space small probe
• Functions of redundancy
• Power Control Unit
• Closed loop speed control of miniature brushless DC motors
• Closed loop speed control
• Miniature brushless DC motors
• Delta Connected BLDC motors
• Adaptive wavelet backstepping control
• Class of mimo underactuated systems
• Multi input multi output
• Proposed control scheme
• Adaptive backstepping controller
• Hybrid position force control for a stewart platform
• Hybrid position force control
• The work surface
• The stewart platform
• Robust control of double inverted pendulum system
• Double inverted pendulum system
• Reference trajectory control
• The dynamic modeling
• Speech recognition in human computer interactive control
• Computer interactive control
• HTK and Sphinx
• Vietnamese speech recognition
• Human computer interaction
• Command shaped robust control of a flexible spacecraft
• Command shaped robust control
• Strong cross couplings
• Loop shaping design
• Optimal control of vehicle active suspension system
• Vehicle active suspension system
• The active suspension system
• LQR control technique
• Mimo fuzzy control for autonomous mobile robot
• Mimo fuzzy control
• Autonomous mobile robot
• Implementation of multi input multi output
• Reach defined target
• Asynthesis method of robust cascade control system
• Robust cascade control system
• Imposes robust conditions
• Soft oscillation index
• Efficient adaptive fuzzy control scheme for industrial manipulators
• Degree of freedom
• Fuzzy control scheme
• IMO nonlinear second order systems
• Multilevel inverter topology and control techniques
• Reduce electromagnetic interference
• Control strategies employed
• Linear quadratic optimal control problem of stochastic switching systems
• Linear quadratic optimal control problem
• Stochastic switching systems
• Non invariant linear systems
• Investigation of hybrid adaptive control schemes
• Needle free jet injection system
• Hybrid adaptive control schemes
• Needle free jet injection
• Modelling and simulations
• Development of a new algorithm
• Control excitation of particular mode of a building
• Particular mode of a building
• Sliding mode control
• Control of electric motor machine tools
• Self organizing fuzzy logic controller
• Modify the control rule
• The self organizing fuzzy logic controller