tailieunhanh - Effect of high fly ash content on engineering properties of recycled aggregate concrete based on alkali activated slag fly ash

The aim of this study is to evaluate the effect of fly ash on the properties of fresh and harden recycled aggregate concrete based on alkali-activated slag. The aggregate of concrete mixtures was prepared with partial replacement of recycled aggregate, which was collected from construction demolish waste. | ISSN 1859-1531 - TẠP CHÍ KHOA HỌC VÀ CÔNG NGHỆ ĐẠI HỌC ĐÀ NẴNG, SỐ 11(132).2018, QUYỂN 2 113 EFFECT OF HIGH FLY ASH CONTENT ON ENGINEERING PROPERTIES OF RECYCLED AGGREGATE CONCRETE BASED ON ALKALI-ACTIVATED SLAG-FLY ASH ẢNH HƯỞNG CỦA LƯỢNG LỚN TRO BAY ĐẾN ĐẶC TÍNH KỸ THUẬT CỦA BÊ TÔNG LÀM TỪ CỐT LIỆU TÁI CHẾ DỰA TRÊN PHƯƠNG PHÁP KIỀM KÍCH HOẠT XỈ LÒ CAO-TRO BAY Duy-Hai Vo1, Chao-Lung Hwang2 1 University of Technology and Education - The University of Danang; vdhai@ 2 National Taiwan University of Science and Technology; mikehwang@ Abstract - The aim of this study is to evaluate the effect of fly ash on the properties of fresh and harden recycled aggregate concrete based on alkali-activated slag. The aggregate of concrete mixtures was prepared with partial replacement of recycled aggregate, which was collected from construction demolish waste. Meanwhile, the binder created by the alkali-activated slag with different replacement levels of fly ash (30%-50%), which was activated by a solution from sodium hydroxide (NaOH) and sodium silicate (Na2SiO3). Experimental results show compressive strength of concrete samples ranges from to 36 MPa at 28 age days. Using FA helps improving the workability of concrete, however, the high level of FA replaced ground granulated blast furnace slag (GGBFS) also causes a negative influence on hardened properties such as strength, ultrasonic pulse velocity (UPV), electrical resistivity (ER). Tóm tắt - Nghiên cứu này nhằm mục đích đánh giá ảnh hưởng của tro bay lên đặc tính kỹ thuật của bê tông làm từ cốt liệu tái chế dưa trên phương pháp kiềm kích hoạt xỉ thép. Cốt liệu được chuẩn bị từ cốt liệu tái chế của công trình đã sụp đổ thay thế một phần cho cốt liệu tự nhiên. Trong khi chất kết dính được làm từ phương pháp kiềm kích hoạt xỉ thép với sự thay thế một phần của tro bay từ 30%-50%, hỗn hợp này được kích hoạt bằng dung dịch xút có nồng độ cao và natri silicat để làm chất kết dính cho bêtông. Kết quả chỉ ra .

crossorigin="anonymous">
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.