tailieunhanh - Effects of some manufacturing factors on the properties of particleboard manufactured from Alder (Alnus glutinosa subsp. Barbata)

In this study, Alder (Alnus glutinosa ) wood was used for particleboard manufacturing. The purpose of this study was to determine the effects of particle moisture content, shelling ratio and the addition of wood dust on the mechanical properties (static bending, modulus of elasticity and internal bond) and physical property (thickness swelling) of particleboard. | Turk J Agric For 27 (2003) 99-104 © TÜB‹TAK Effects of Some Manufacturing Factors on the Properties of Particleboard Manufactured from Alder (Alnus glutinosa subsp. Barbata) Gökay NEML‹ Karadeniz Technical University, Faculty of Forestry, Trabzon - TURKEY Received: Abstract: In this study, Alder (Alnus glutinosa ) wood was used for particleboard manufacturing. The purpose of this study was to determine the effects of particle moisture content, shelling ratio and the addition of wood dust on the mechanical properties (static bending, modulus of elasticity and internal bond) and physical property (thickness swelling) of particleboard. The addition of 10% wood dust to particles decreased the thickness swelling, modulus of elasticity and bending strength, while increasing the internal bond. Particleboards manufactured from particles with 1% moisture content had lower internal bond, modulus of elasticity and bending strength and higher thickness swelling values than those produced from particles with 4% moisture content. Increasing face:core ratio from 30:70% to 45:55% improved the physical and mechanical properties of particleboards. Overall results showed that particleboards made from Alder exceed the EN standards for internal bond, modulus of elasticity and static bending. However, thickness swelling values were higher (poor) than requirements. For this reason, additional work needs to be done on improving the physical properties of particleboard produced from Alder. Key Words: Particleboard, Alder (Alnus glutinosa subsp. Barbata), Static Bending, Modulus of Elasticity, Internal Bond, Thickness Swelling, Manufacturing Factors Baz› Üretim Faktörlerinin K›z›la¤aç (Alnus glutinosa subsp. Barbata)’tan Üretilen Yongalevha Özellikleri Üzerine Etkileri Özet: Bu çal›flmada, K›z›la¤aç (Alnus glutinosa subsp. Barbata) odunu yongalevha üretiminde kullan›lm›flt›r. Bu çal›flman›n amac›; kurutulmufl yonga rutubeti, d›fl:orta tabaka yonga oran› ve odun .

• Nông nghiệp
• Particleboard manufacturing
• Alder Alnus glutinosa subsp
• Barbata
• Static bending
• Modulus of elasticity
• Internal bond
• Thickness swelling
• Manufacturing factors
• E1 type particleboard
• Technological properties
• Manufacturing variables
• Urea formaldehyde
• Tạp chí khoa học
• Cocoa pod husk
• Particle board
• Physical mechanical properties
• Modulus of rupture