tailieunhanh - About the gibbs-appel equations for multibody systems

In this paper a matrix form of Gibbs-Appel function is recommended for multibody dynamics formulations. The form proposed in this paper seems to be more clear and suitable for automatic generation of dynamical equations of motion. The advantages followed from the formulation proppsed are illustrated through an example. | Vietnam Journal of Mechanics, VAST, Vol. 28, No. 4 (2006) , pp. 225 - 229 ABOUT THE GIBBS-APPEL EQUATIONS FOR MULTIBODY SYSTEMS NGUYEN VAN KHANG Department of Applied Mechanics, Hanoi University of Technology Abstract. In this paper a matrix form of Gibbs-Appel function is recommended for multi- body dynamics formulations. The form""·proposed in this paper seems to be more clear and suitable for automatic generation of dynamical equations of motion. The advantages followed from the formulation prop_psed are illustrated through an example. 1. INTRODUCTION Gibb-Appel equations were introduced by in 1879 [1] and were subsequently studied and formalized by Appel in 1900 [2] . The Gibbs-Appel equations for the nonholonomic syst em constituted of n particles have been shown in a lot of specialist books [3,4]. In this paper we consider a system S constituted of p rigid bodies. The Gibbs-Appel function is defined as [5,6] G = ~ ja 2 dm () (S) and the equations of motion are obtained by fJG - = 8 'Tri (i = 1, ., J) rri , () where rri is t he quasi-active force, 'Tri is the quasi-coordinate, f is the number of degrees of freedom of t he system. . The subj ect of this paper is the proposition of a useful matrix form of Gibbs-Appel function of multibody system. The formulation is aimed at more automatic and clear generation of t he dynamical equations of motion. 2. THE MATRIX FORMULATION OF GIBBS-APPEL FUNCTION As shown in Fig. 1, which depicts a rigid body in the three-dimensional space, the global position of an arbitrary point on the body can be written as r= f'A +u () By differentiating Eq. () with respect to time one obtains the velocity of an arbitrary point on the rigid body () v= VA +w x a. The time derivative of Eq. (2 .2) gives acceleration relation as a:= a:A +a x a+ w x (w x ii) () 226 Nguyen Van Khang 1 - 2dm -a 2 ti Fig. 1. Rigid body in the space By substituting Eq. (2 .3) into Eq. (), one .

• Cơ khí - Chế tạo máy
• Vietnam Journal of Mechanics
• About the gibbs appel equations for multibody systems
• The gibbs appel equations
• Dynamical equations of motion
• Gibbs Appel function
• Dang Dinh Ang
• Nonlinear analysis and mechanics
• Dynamic problems involving stationary cracks
• The Wiener Hopt technique
• Dual integral equations
• Dual integrals in non linear fracture mechanics
• Non linear fracture mechanics
• Energy release rate
• Discuss the obtained
• The alpha finite element method (αFEM)
• Solid mechanics using triangular and tetrahedral elements
• Suitable computational cost
• NS FEM makes
• The upper bound property
• Non linear constitutive problems in solid mechanics
• Non linear constitutive problems
• Languages Gibian and special operators
• The application FEM
• Betts miller janjic convective parameterization scheme
• H14 31 model to forecast heavy rainfall in Vietnam
• Betts Miller Janjic
• Three rain seasons
• Manufacturing dry mixed cement mortar
• High compressive strength
• High flexural strength
• Low shrinkage and high watertightness for restoration
• Damaged hydraulic structures in Vietnam
• Standard gradient models and crack simulation
• Standard gradient models
• The propagation of cracks
• Damage mechanics and crack simulation
• The interaction between two parametric excitations
• The second and third degrees
• The asymptotic method of nonlinear mechanics
• Dynamic system governed
• Comparison of two hydrological model simulations
• Nam and Xinanjiang for Nong Son catchment
• The Central Vietnam
• The runoff components
• 3 D numerical simulation
• The tidal circulation
• The gulf of Tonkin
• The kinetic energy distribution
• Duality in the analysis of responses to nonlinear systems
• The analysis of responses
• The original nonlinear systems
• The study of nonlinear mechanics
• Aerodynamics of a wing in surface effect ship
• Theory and experiment
• Wing in surface effect ship
• The aerodynamic characteristics
• The Institute of Mechanics
• The error estimate
• The convergence rate for h
• p refinement
• The finite element analysis
• Three dimensional elastostatic mechanics problems
• Some initial experimental results
• Free water layer formation in horizontal pipes
• Water layer formation
• Hanoi Institute of Mechanics
• Bending vibration of beam elements under moving loads
• Considering vehicle braking forces
• Fluctuations of structures
• Beam elements according
• Continuous element for vibration analysis
• Thick shells of revolution
• Continous Element Method
• Finite element solutions
• Natural frequencies and harmonic responses
• Cast3m implementation of the extended finite element method
• The extended finite element method for cohesive crack
• Quasi brittle materia
• The proposed implementation
• The displacement discontinuities
• Buckling analysis of simply supported composite laminates subjected
• In plane compression load
• A novel mesh ffree method
• Alternative numerical technique
• Mesh free method
• A three story building
• Hedge algebras based fuzzy controller
• The structural system
• The El Centro earthquake
• Three story building against earthquake
• Laminar separation phenomenon combining with numerical calculations
• The turbulent separation
• The laminar separation
• Experimental study on mechanical properties
• Three phase polymer composite reinforced
• Glass fibers and titanium oxide particles
• Polymer composite reinforced
• Three phase composite
• Dynamic characteristics of elastically supported beam subjected
• A compressive axial force and a moving load
• The implicit Newmark method
• The Galerkin finite element method
• The axial force
• Eccentrically stiffened functionally graded plates and shallow shells
• Von Karman Donnell sense
• The formulation of governing equations
• The classical shell theory
• Mathematical modelling and control of the evolution
• Dynamic systems interacting with medium
• Mathematical modeling evolutional systems interacting
• Two conjugate mechanical subsystems
• Evaluating structural safety based on fuzzy set theory
• Evaluating structural safety
• The fuzzy reliability
• Simple beam structure