tailieunhanh - Multiple crack identification in stepped beam by measurements of natural frequencies

This is based an explicit expression of the natural frequencies in term of crack parameter derived in the form similar to the so-called Rayleigh quotient for vibrating beam. The obtained simple relationship between natural frequencies and crack parameters enables not only accurate calculating the natural frequencies but also to develop an efficient procedure for detecting multiple cracks from given natural frequencies. | Volume 36 Number 2 2 2014 Vietnam Journal of Mechanics, VAST, Vol. 36, No. 2 (2014), pp. 119 – 132 MULTIPLE CRACK IDENTIFICATION IN STEPPED BEAM BY MEASUREMENTS OF NATURAL FREQUENCIES Nguyen Tien Khiem1,∗, Duong The Hung2 , Vu Thi An Ninh3 of Mechanics, VAST, 18 Hoang Quoc Viet, Hanoi, Vietnam 2 Thai Nguyen University of Technology, Vietnam 3 Hanoi University of Transport and Communication, Vietnam 1 Institute ∗ E-mail: ntkhiem@ Received July 26, 2013 Abstract. A new approach is proposed for calculating natural frequencies and crack detection in a stepped cantilever beam with arbitrary number of cracks. This is based an explicit expression of the natural frequencies in term of crack parameter derived in the form similar to the so-called Rayleigh quotient for vibrating beam. The obtained simple relationship between natural frequencies and crack parameters enables not only accurate calculating the natural frequencies but also to develop an efficient procedure for detecting multiple cracks from given natural frequencies. The proposed technique called crack scanning method is illustrated and validated by numerical results. Keywords: Multi stepped beam, Rayleigh quotient, multi-crack detection, frequency based method, modal analysis. 1. INTRODUCTION Early detecting damage in engineering structures such as cracks is vitally important to prevent catastrophe that may lead to loss of either material or human lives. The task helps also to extend the structure lifetime by prompt maintenance and repair. A lot of methods have been proposed to detect cracks in structures and most of them are based on the crack-induced change in the dynamic characteristics of structure under consideration. This is because of the fact that crack in a structure member certainly modify the structure dynamic properties that can be usually obtained as results of the dynamic testing. The core of the vibration-based crack detection is the change in the structure modal parameters as

• Cơ khí - Chế tạo máy
• Vietnam Journal of Mechanics
• Multiple crack identification in stepped beam
• Measurements of natural frequencies
• Given natural frequencies
• Crack parameters enables
• Crack parameter derived
• Dang Dinh Ang
• Nonlinear analysis and mechanics
• Dynamic problems involving stationary cracks
• The Wiener Hopt technique
• Dual integral equations
• Dual integrals in non linear fracture mechanics
• Non linear fracture mechanics
• Energy release rate
• Discuss the obtained
• The alpha finite element method (αFEM)
• Solid mechanics using triangular and tetrahedral elements
• Suitable computational cost
• NS FEM makes
• The upper bound property
• Non linear constitutive problems in solid mechanics
• Non linear constitutive problems
• Languages Gibian and special operators
• The application FEM
• Betts miller janjic convective parameterization scheme
• H14 31 model to forecast heavy rainfall in Vietnam
• Betts Miller Janjic
• Three rain seasons
• Manufacturing dry mixed cement mortar
• High compressive strength
• High flexural strength
• Low shrinkage and high watertightness for restoration
• Damaged hydraulic structures in Vietnam
• Standard gradient models and crack simulation
• Standard gradient models
• The propagation of cracks
• Damage mechanics and crack simulation
• The interaction between two parametric excitations
• The second and third degrees
• The asymptotic method of nonlinear mechanics
• Dynamic system governed
• Comparison of two hydrological model simulations
• Nam and Xinanjiang for Nong Son catchment
• The Central Vietnam
• The runoff components
• 3 D numerical simulation
• The tidal circulation
• The gulf of Tonkin
• The kinetic energy distribution
• Duality in the analysis of responses to nonlinear systems
• The analysis of responses
• The original nonlinear systems
• The study of nonlinear mechanics
• Aerodynamics of a wing in surface effect ship
• Theory and experiment
• Wing in surface effect ship
• The aerodynamic characteristics
• The Institute of Mechanics
• The error estimate
• The convergence rate for h
• p refinement
• The finite element analysis
• Three dimensional elastostatic mechanics problems
• Some initial experimental results
• Free water layer formation in horizontal pipes
• Water layer formation
• Hanoi Institute of Mechanics
• Bending vibration of beam elements under moving loads
• Considering vehicle braking forces
• Fluctuations of structures
• Beam elements according
• Continuous element for vibration analysis
• Thick shells of revolution
• Continous Element Method
• Finite element solutions
• Natural frequencies and harmonic responses
• Cast3m implementation of the extended finite element method
• The extended finite element method for cohesive crack
• Quasi brittle materia
• The proposed implementation
• The displacement discontinuities
• Buckling analysis of simply supported composite laminates subjected
• In plane compression load
• A novel mesh ffree method
• Alternative numerical technique
• Mesh free method
• A three story building
• Hedge algebras based fuzzy controller
• The structural system
• The El Centro earthquake
• Three story building against earthquake
• Laminar separation phenomenon combining with numerical calculations
• The turbulent separation
• The laminar separation
• Experimental study on mechanical properties
• Three phase polymer composite reinforced
• Glass fibers and titanium oxide particles
• Polymer composite reinforced
• Three phase composite
• Dynamic characteristics of elastically supported beam subjected
• A compressive axial force and a moving load
• The implicit Newmark method
• The Galerkin finite element method
• The axial force
• Eccentrically stiffened functionally graded plates and shallow shells
• Von Karman Donnell sense
• The formulation of governing equations
• The classical shell theory
• Mathematical modelling and control of the evolution
• Dynamic systems interacting with medium
• Mathematical modeling evolutional systems interacting
• Two conjugate mechanical subsystems
• Evaluating structural safety based on fuzzy set theory
• Evaluating structural safety
• The fuzzy reliability
• Simple beam structure