tailieunhanh - Calculation and design of a combined buckling and bending testing equipment
In this study, a new combined buckling and bending testing equipment is calclated and designed to perform both tests in a single apparatus. Buckling testing is carried out on various length struts which are pinned and clamped ends. | Journal of Science & Technology 127 (2018) 045-049 Calculation and Design of a Combined Buckling and Bending Testing Equipment Nguyen Van Hieu*, Le Xuan Truong Hanoi University of Science and Technology – No. 1, Dai Co Viet Str., Hai Ba Trung, Ha Noi, Viet Nam Received: December 20, 2017; Accepted: June 25, 2018 Abstract In this study, a new combined buckling and bending testing equipment is calclated and designed to perform both tests in a single apparatus. Buckling testing is carried out on various length struts which are pinned and clamped ends. Buckling loading is determined by the test with the maximum range of 500 N. Struts using for buckling test are aluminum alloy with 2 mm x 20 mm cross section in various lengths of 300 mm, 350 mm, 400 mm, 450 mm and 500 mm. Bending testing is carried out to examine the flexural rigidity of the struts. In bending test, the changeable supports are designed which can be fixed, pinned and rolled. Struts using for bending test are aluminum and steel alloys with 3 mm x 20 mm cross section in length of 600 mm. Bending load is in a range of 20 N. The whole equipment was then simulated in commercial software to investigate the designed structure. The obtained results show that the designed structure is met requirements for working load conditions. Keywords: Bending test, Buckling test, Combined bending & buckling test 1. Introduction* Buckling and bending phenomena are common in mechanical engineering, civil engineering and manufacturing. Understanding on such phenomena can prevent unstability, damage or fatality to structures. Hence, studying and testing these phenomena in universities play an important role in most areas of construction, design as well as manufacturing industries. Currently, there are quite a number of companies and factories have designed and manufactured bending and buckling testing equipments. Figure 1 shows an example of a buckling testing equipment on the market [1]. However, the price of such testing .
đang nạp các trang xem trước
