tailieunhanh - Thiết kế Anten mimo ba băng với độ tương hỗ thấp sử dụng cấu trúc mặt đất khuyết DGS

Bài viết Thiết kế Anten mimo ba băng với độ tương hỗ thấp sử dụng cấu trúc mặt đất khuyết DGS trình bày Nội dung bài báo đề xuất một kiến trúc anten MIMO đa băng cho các ứng dụng băng rộng trong các thiết bị cầm tay di động. Với cấu trúc PIFA, anten MIMO đề xuất sử dụng vật liệu FR4 đạt được kích thước khá nhỏ mm. | TẠP CHÍ KHOA HỌC VÀ CÔNG NGHỆ NĂNG LƯỢNG - TRƯỜNG ĐẠI HỌC ĐIỆN LỰC (ISSN: 1859 - 4557) TRIPLE-BAND MIMO ANTENNA DESIGN WITH LOW MUTUAL COUPLING USING DEFECTED GROUND STRUCTURE THIẾT KẾ ANTEN MIMO BA BĂNG VỚI ĐỘ TƢƠNG HỖ THẤP SỬ DỤNG CẤU TRÚC MẶT ĐẤT KHUYẾT DGS Duong Thi Thanh Tu 1,2 1 , Nguyen Gia Thang , Vu Van Yem 2 1 Faculty of Telecommunication1, Posts and Telecommunications Institute of Technology 2 School of Electronics and Telecommunications, Hanoi University of Science and Technology Abstract: The multiband MIMO antenna design for broadband mobile’s applications is proposed in this paper. The proposed MIMO antenna that is based on the PIFA structure and designed on FR4, gets compact in size with total dimension of mm3. At first, a MIMO PIFA antenna is presented using Ushaped Slots on radiating patch and two rectangular DGSs on the ground plane which puts forward the antenna resonant in three frequencies: GHz, GHz, and GHz with bandwidths of , and respectively for Wi-Fi, Wimax/LTE and Direct Broadcast Satellite DBS of C channel applications. Good return loss, antenna gain, and radiation pattern characteristics are obtained in the frequency band of interest. Then, to reduce the mutual coupling between antenna elements at close distance of 4 mm, equivalent to at GHz resonant frequency, a novel “slot and variation structure” of DGS is proposed. Moreover, this DGS has enhanced MIMO antenna bandwidth at all three bands, especially at resonant frequency. Key words: PIFA, MIMO, DGS, low mutual coupling MIMO antenna. Tóm tắt: Nội dung bài báo đề xuất một kiến trúc anten MIMO đa băng cho các ứng dụng băng rộng trong các thiết bị cầm tay di động. Với cấu trúc PIFA, anten MIMO đề xuất sử dụng vật liệu FR4 đạt được kích thước khá nhỏ mm3. Cộng hưởng tại 3 tần sô GHz, và GHz nhờ khe chẻ hình chữ U trên mặt bức xạ với độ rộng băng thông tương ứng , và , anten .