tailieunhanh - Ebook Engineering analysis with ANSYS: Part 1

(BQ) Part 1 book "Engineering analysis with ANSYS" has contents: Basics of finite-element method, overview of ANSYS structure and visual capabilities, application of ANSYS to stress analysis, mode analysis. | Engineering Analysis With ANSYS Software This page intentionally left blank Engineering Analysis With ANSYS Software Y. Nakasone and S. Yoshimoto Department of Mechanical Engineering Tokyo University of Science, Tokyo, Japan T. A. Stolarski Department of Mechanical Engineering School of Engineering and Design Brunel University, Middlesex, UK AMSTERDAM • BOSTON • HEIDELBERG • LONDON • NEW YORK • OXFORD PARIS • SAN DIEGO • SAN FRANCISCO • SINGAPORE • SYDNEY • TOKYO Butterworth-Heinemann is an imprint of Elsevier Elsevier Butterworth-Heinemann Linacre House, Jordan Hill, Oxford OX2 8DP 30 Corporate Drive, Burlington, MA 01803 First published 2006 Copyright © 2006 N. Nakasone, T. A. Stolarski and S. Yoshimoto. All rights reserved The right of Howard D. Curtis to be identified as the author of this work has been asserted in accordance with the Copyright, Design and Patents Act 1988 No part of this publication may be reproduced in any material form (including photocopying or storing in any medium by electronic means and whether or not transiently or incidentally to some other use of this publication) without the written permission of the copyright holder except in accordance with the provisions of the Copyright, Designs and Patents Act 1988 or under the terms of a licence issued by the Copyright Licensing Agency Ltd, 90 Tottenham Court Road, London, England W1T 4LP. Applications for the copyright holder’s written permission to reproduce any part of this publication should be addressed to the publisher Permissions may be sought directly from Elsevier’s Science & Technology Rights Department in Oxford, UK: phone (+44) 1865 843830, fax: (+44) 1865 853333, e-mail: permissions@. You may also complete your request on-line via the Elsevier homepage (), by selecting ‘Customer Support’ and then ‘Obtaining Permissions’ The copyrighted screen shots of the ANSYS software graphical interface that appear throughout this book are used with .