tailieunhanh - Effect of aging treatment parameters on microstructure and properties of Cu-Ni-Si alloy

In this paper, effect of cold pre-deformation and sequent aging time and temperature on microstructure and properties of alloy are reported. The results shown that, hardness and electrical conductivity of alloy increase with increasing cold deformation degree after quenching and subsequent aging. | Journal of Science and Technology 54 (5A) (2016) 75-81 EFFECT OF AGING TREATMENT PARAMETERS ON MICROSTRUCTURE AND PROPERTIES OF Cu-Ni-Si ALLOY Phung Tuan Anh*, Le Minh Duc, Pham Dai Phuoc Military Technical Academy - Ministry of Defence, 236 Hoang Quoc Viet, Bac Tu Liem, Hanoi * Email: phungtuananhmta@ Received: 15 July 2016; Accepted for publication: 04 December 2016 ABSTRACT In this paper, effect of cold pre-deformation and sequent aging time and temperature on microstructure and properties of alloy are reported. The results shown that, hardness and electrical conductivity of alloy increase with increasing cold deformation degree after quenching and subsequent aging. With undeformed specimens after quenching, hardness and electrical conductivity of alloy reach maximum values with subsequent aging at 425 and 475 o C, respectively. Alloy attains maximum hardness of 255 HV5 with aging at 425 oC for hours, while maximum electrical conductivity of %IACS with aging at 475 oC for 8 hours. In the case of deformed specimens after quenching and subsequent aging, this rule is still preserved. Especially, at 70 % cold pre-deformation degree, alloy attains the maximum hardness of HV5 with aging at 425 oC for h, while maximum electrical conductivity reaches % IACS with aging at 475 oC for 6 h. Keywords: alloy, cold pre-deformation, deformation degree, aging, Vickers hardness, electrical conductivity. 1. INTRODUCTION In all of the copper alloys used in electrical engineering, Cu-Ni-Si alloy have been considerable interest in the applications of leadframe, electrical contacts, bus conductor, electrodes. due to its high strength and good electrical conductivity [1 - 4]. Recently, the studies of Cu-Ni-Si alloy still continue to develop in many different priorities. Most studies about this alloy system aim to improve the mechanical properties, especially combination of high strength and good electrical conductivity

• Hoá học
• Journal of Science and Technology
• Effect of aging treatment parameters
• Microstructure and properties of Cu Ni Si alloy
• Cold pre deformation
• Sequent aging time
• Journal of Marine science and Technology
• Marine science and Technology
• Marine science and Technology no 56
• Marine science and Technology year 2018
• Evaluation method
• Electrical energy management model
• Marine science and Technology no 53
• Diesel engines
• Journal of Fisheries science and Technology
• Fisheries science and Technology
• Fisheries science and Technology no 3
• Fisheries science and Technology year 2016
• Striped catfish
• Common carp cyprinus carpio
• Fisheries science and Technology no 4
• Fisheries science and Technology year 2018
• Coastal fi shing activities
• White striped cleaner shrimp
• Journal of Science
• Journal of Technology
• Technology Management
• Science and Technology
• International integration
• Science and Technology Strategy
• Evaluation of science and technology
• Global journal of computer science
• Global journal of computer science and technology
• Information & technology
• GIS based fire emergency response system
• Marine science and technology no 61
• Actual GPS receivers
• Display information on stability
• Nuclear science and technology
• The journal of Nuclear science and technology
• Rotary rack served for elemental concentration
• Seawaterusing co precipitation method
• Natural radionuclides
• Experimental data
• Low energy experiments
• Multigroup cross sections
• Stable isotopic values
• Radial blanket
• Dissolved nitrogen compounds
• Irradiation channels
• Neutron rich nuclei
• Prescila neutron probe
• Full core conversion
• Multipurpose research reactor
• Aquatic environment
• Geochemical parameters
• External reactor vessel cooling method
• Radiation crosslinked scaffolds
• Adipose derived stem cell culture
• Treatment plans
• Minor actinide compositions
• IM NAA of non standard geometrical samples
• Cross shaped obstacle
• University entrepreneurship
• Entrepreneurial research university
• Technology innovation
• Industry university cooperation
• Regional innovation
• Journal of technology and science education
• Bring science and technology closer to secondary school
• Technology closer to secondary school
• Secondary school teachers
• Face to face
• Technology development
• Technology commercialization
• The role of informal science centers in science education
• Informal science center
• Attudes toward science
• Scientfic thinking skills
• Scientific research
• Research quality
• Strategy and policy
• Research Organizations
• Policy Planning
• Science and Technology development
• Theory Z
• Human Resources
• Development policy of Japan
• ‘Standards’ on the bench
• Technological literacy render an adequate image of technology
• Adequate image of technology
• Standards for technological literacy
• Philosophy of technology
• The nature of technology
• Concepts of technology
• Post secondary project based learning in science
• Post secondary project based learning in technology
• Post secondary project based learning in engineering and mathematics
• Post secondary project