tailieunhanh - Double seam reference manual

Invite you to consult the document content, "Double seam reference manual" below. Contents of the document referred to the content you: History, terminology, double seam formation, measurement process, seam quality control, fault finding, seamer set up equipment. Hopefully document content to meet the needs of learning, work effectively. | IL-r BCME z Beverage Can Makers Europe BCME J Beverage Can Makers Europe BCME is a European trade body which represents the three major drinks can manufacturers REXAM CROWN Brand-Building Packaging BCME was established to promote the beverage Can in Europe and does so through the issue of statistics an annual market report and environmental studies. Further information about BCME can be found at In addition to BCME there are country groups in France - La Boite Boisson Germany - Forum Getrankedose Spain - Latas de Bebidas United Kingdom - The Can Makers Eastern Europe - Bevcan East BCME can be contacted by e-mail info@ 2 cs BCME x Beverage Can Makers Europe Notes Please contact your local Can End supplier for any further information not covered in this publication 54 r Beverage Can Makers Europe Double Seam Reference Manual Introduction The purpose of this manual is to assist personnel who determine the quality of the double seam. The chapters in this manual permit a logical understanding of machine operation and common seam defects. It describes the critical and operating parameters that need to be measured and maintained to ensure double seam integrity. The quality of the double seam is the responsibility of the filler. The Industry Double Seam specifications and any additional information may be obtained from your local Can supplier. Spring 2008

• Hoá học
• Double seam reference manual
• History terminology
• Double seam formation
• Measurement process
• Seam quality control
• Seamer set up equipment